Need Help with Ford Transit 2.2 Tdci Airbag

[ollync]

Hello
Today i misconfigured my RCM module from my Ford Transit 2007, at least i think so.
I have entered the menu in IDS (just for curiosity): Electrical -> Service Functions -> Module Configuration -> PAD Switch.
After i did what IDS asked me to do ( ignition off ... etc) i got an Programming failure or something like that, and after that after turning ignition on, airbag light starts to flash rapidly.

Airbag faults are B1881 - Safetybelt Passenger Retractor Circuit Failure and B2477 - Module Configuration Failure, both i cannot erase.

So now my question : does anybody know how to bring back to life my Airbag?

Thanks in advance .

[credoline]

The same way you are f***d, you need to make it right.

[ollync]

I don't understand what you mean.

RCM part number i forgot : 6C1T_14B056_AE

Here is dump. Car has driver and passenger airbag. Maybe somebody may correct it. thanks.

421538

[credoline]

Reconfigure again

[ollync]

Reconfigure again

I tried , but is not working. When i try to reconfigure , after a some time rear door unlock, instrument cluster resets, headlights go on an off and i get error : Module configuration failure.

I have reprogrammed on bench the eeprom from RCM module with a good dump from a car that has only one airbag , old errors are gone ,airbag light is not flashing, but now airbag light stays on and i get passenger airbag igniter error.
I think i need a good dump from any module with 2 airbags, then i change vin in dump with my vin and it should work.

What i saw is that in ori dump from my RCM somehow the Vin disappeard , i think whole dump is corrupt.

[ollync]

So, until now i didn't found any working dump.
I've got 6 or 7 dumps who either throws Passenger Airbag Error or Passenger Pretensioner Error or module internal error.
Doees anybody have a dump from an Airbag module that was on a car with Driver and Passenger Airbag , but with standard seats (No Seat belt pretensioner)?
Or does anybody know where in the dump is the configuration data for how many airbags are installed and if seat pretensioners are installed?

[ollync]

Problem solved, Topic closed.
Thanks for all replays from everyone.

PS: Anybody who has misconfigured modules ( 6C1T-14B056-AE) send me your dump and cars VIN and i will repair your dump. My solution works also for swapping airbag ecu from cars with one airbag to multiple airbags with or without seatbelt pretensioner and vice versa. It will not work for modules with crash data. Crash data must be resolved separately.


Sent from my iPhone using Tapatalk

[stanleycvel]

hi, please you can config for me it?s dump
VIN WF0XXXTBFBTC27745
1 Airbag and 1 pretensinador

Thanks

[ollync]

hi, please you can config for me it?s dump
VIN WF0XXXTBFBTC27745
1 Airbag and 1 pretensinador

Thanks


try this and report...

457253

[ollync]

try this and report...

457253

So? Did it worked? Some feedback would be nice.


Sent from my iPhone using Tapatalk

[argegsm]

my file need repair car have one airbag and pretensioner...

[mario.ie]

[QUOTE=ollync;3055402]try this and report...

can you make it work for
2 airbags driver and pasanger
and 2 pretensioners
for

WF0XXXTTFXDB51005

transit 2012
please
kind regards mario

[ollync]

[QUOTE=ollync;3055402]try this and report...

can you make it work for
2 airbags driver and pasanger
and 2 pretensioners
for

WF0XXXTTFXDB51005

transit 2012
please
kind regards mario

Try and report

[mario.ie]

still have the config problem with current faults b1886 and b1935

[ollync]

The car from which you gave me the vin , has originally from factory driver and passenger airbags and pretensioners?

Try this one.

[ollync]

What tool do you use to write eeprom ?

[mario.ie]

hi Ollync,yes the car is camper van based on transit with 2 airbags and 2 belt pretensioners from factory ,and for read write eprom i use original avdi from abritus72

[ollync]

Vehicle equipment from VIN, says only driver airbag, nothing about passenger airbag .
Let me check tomorrow by Ford Dealer.

I have modified your dump ( first one that i posted ) with your vin‘s original as-built data.
That should work.

With avdi , you can dowload your cars as-built data an try to recode whole car.

630193


Sent from my iPhone using Tapatalk Pro

[Mondeosweden]

can you make it work for
2 airbags driver and pasanger.

WF0XXTTFYBP32442

[Mondeosweden]

Problem solved, Topic closed.
Thanks for all replays from everyone.

PS: Anybody who has misconfigured modules ( 6C1T-14B056-AE) send me your dump and cars VIN and i will repair your dump. My solution works also for swapping airbag ecu from cars with one airbag to multiple airbags with or without seatbelt pretensioner and vice versa. It will not work for modules with crash data. Crash data must be resolved separately.


Sent from my iPhone using Tapatalk
hi, please you can config for me it?s dump
VIN WF0XXTTFYBP32442
2 Airbag

[ollync]

hi, please you can config for me it?s dump
VIN WF0XXTTFYBP32442
2 Airbag

Upload dump


Sent from my iPhone using Tapatalk Pro

[ntom]

I did the same mistake (do not ask why!) - coded PAD -> B2791 arised, tried to remove -> B4277 left.
(Both procedures passed with all green checkboxes in IDS...)
Read EEPROM using Carprog (VIN is visible in dump):

Then I tried restore AsBuilt using official AVDI with ETIS (no VIN anymore):

Can you help me with this, please!

[ollync]

I did the same mistake (do not ask why!) - coded PAD -> B2791 arised, tried to remove -> B4277 left.
(Both procedures passed with all green checkboxes in IDS...)
Read EEPROM using Carprog (VIN is visible in dump):

Then I tried restore AsBuilt using official AVDI with ETIS (no VIN anymore):

Can you help me with this, please!

Try this, delete errors.

[ntom]

Thank you!
Your corrections are OK!
No more faults in RCM and nervous blinking in dash :)

[Think1982]

Hi
Need help can someone clear crash