2010 Sprinter ezs soldering points/image for r270+ clone

[vjr]

Hi all, I have been reading many posts to find out how to do odometer correction on 2010 Sprinter Van.I have an r270 and need the soldering points for the ezs/eis.I can't actually see the mask but after extensive reading every points to them having the 0L01Y mask. But when I choose the picture it shows 3 Cas options which relate to BMW. So I don't know where to solder.Can someone please help by uploading a picture please.
My 2nd questions is that I also have a dp3 clone and was wondering if that would be good to change the km in the cluster.Thanks

[teerak2uk]

Better with r260 on ezs

[vjr]

I'll look at investing in one in the future, but right now I have the ezs and cluster out of the Van and need some guidance on how to wire up with the r270+

[teerak2uk]

points possibly same as sprinter v1 in manual but you would still need to change km manually maybe better to get some hw that there's less chance of messing it up

[bersch8688]

9s12 gold programmer from edr pauli work PERFECT

[teerak2uk]

9s12 gold programmer from edr pauli work PERFECT
And his reply will be he don't have that.

[antenor]

http://www.digital-kaos.co.uk/forums/showthread.php/569655-Reading-ZGS-Mercedes-sprinter-with-270

[vjr]

Thanks to everyone for your input it has made it much clearer for me to change the km in the ezs.Just one more question.In the past I have changed the instrument cluster km on a 2005 639 vito with my dp3 clone so I thought I would be able to do this 2010 sprinter as well but I can't seem to find the option in the dp3 to do it.Is there a way to change the km in the cluster with the xprog m? and if so anyone have a procedure or image for the solder points? The tools I have are the xprog m , Dp3 , R270+ , tachopro 2008 and c3 mux with Star 2013 all clones. Thanks for all the help guys.

[antenor]

Yes Xprog can do (Read eeprom) this dash. Read and post the dump.

[teerak2uk]

Yes Xprog can do (Read eeprom) this dash. Read and post the dump.
He is trying to read ezs not dash

[antenor]

He is trying to read ezs not dash

No mate you don't read the VJR post!
Read this: "Is there a way to change the km in the cluster with the xprog m?"

[vjr]

Thankyou , I have never done it with the xprog before can you please explain to me the procedure or do you have maybe a picture of the type of eeprom , are there in circuit soldering points or do I have to desolder the eeprom.Thankyou for your patience.

[vjr]

As fate would have it I think there may be something wrong with my xprog.After wiring up the ezs ,the read button would stay greyed out and wouldn't allow me to read.So I checked to see if I had 5v on the pin of the bdm adaptor and it was not present.I disconnected the bdm adapter and there was 5.86v on the pin of the main unit so it looks like to me that the bdm adaptor maybe faulty.Feeling frustrated after asking all you good people for info and not being able to put it to action,I resorted to un soldering everything and wiring in my R270.I selected 0L01Y as has been suggested by many for this type of ezs and as it started going through its process it was looking promising and then I get this error message.Has anyone come across this message when trying to read a Sprinter ezs? And if so can someone please enlighten me what to do next.Please any help will be much appreciated.Cheers.
423181

[antenor]

Mate R270 is to EZS and Xprog is to eeprom DASH!

[vjr]

I get this error message when I read witb R270. 423199Has anyone come across this message when trying to read a Sprinter 2010 ezs? And if so can someone please enlighten me what to do next.Please any help will be much appreciated.Cheers.

[vjr]

423222
Ok so I've had some luck with the read.After looking closely with a magnifying glass realized I had a dry joint on on one of the wires,hence why I got the error.Anyhow I've posted the original ezs bin and I have also posted an edited one that I created with the dashboard software.It's the first time I've used it.Can some one please verify for me that both files are good.The edited file should show 117136 km.Thanks

[vjr]

423285The eeprom in the cluster is 25LC6401 Will xprog read this because I can't see it in the software?

[teerak2uk]

The eeprom in the cluster is 25LC6401 Will xprog read this because I can't see it in the software?
Yes it will

[vjr]

Thanks ,teerak2uk but I can't see it in the software I'm using xprog version 5 can you guide me how to select the right one.

[antenor]

25640 or 95640 are the same!

[vjr]

AAhhhhh thankyou so much I've been pulling my hair out all day trying to find it but thought I was going stupid. Lol

[vjr]

Got it all working the only thing I need to do now is erase the assyst service history read somewhere it can be done through das in developer mode.Anyway that's for another day.I couldn't get my xprog working it was always showing device silent,so I managed to change the dash eeprom with my dp3 under 95640 and it worked.The ezs I changed with my R270+.Thanks again for everyone's help I would never have been able to do it otherwise.Wow now that I've got a little knowledge I must be dangerous lol.Cheers

[dodo34]

do you have a picture of the soldering points for this EZS ?