KESS v2 4.036 - need NXP dump

[number7hd]

I need NXP HEX DUMP.
Does ULINK2 will be enaugh to program NXP?

SN: K10033818
Customer Code: C7514
Group Code: C7514

[ecutuners]

Search on here I put 4.036 and 6.070 real dumps, you can flash with ulink if your nxp isn't crp3

[number7hd]

how can I check it? After programmer connection or by this what is on NXP written?

[morgano]

If you can connect with ulink and flashmagic to your nxp then it has not crp3. Crp3 locked nxp ignores uart.

[number7hd]

"ecutuners" - I see that You are good in this topic.
after using "atayok" solution with "update" folder, KESS is unlock but every car and every engine is GREY !!! so I know that NXP is locked.

Question is:
1. ULINK2 or J-LINK is only solution in this case, or can I do it by SD?
2. Do You have .cfg file with my SN?

[tango]

cfg files for all free versions of 4.36 are posted
search kess and read through the posts/threads
if you only have everything greyed out and in info all is still there then just do update again
if not work then try with new sd card
everything is covered here in forum and other forums

[number7hd]

believe me - I was searching those file all day - everywhere DEAD LINKS.

I have connection and SN is showing up, CUSTOMER ID doesn't.

[hackgsm]

http://www.digital-kaos.co.uk/forums/showthread.php/470321-Kess-V2-Harware-Rework-FREE-SOLUTION!/page33

[number7hd]

it's for 3.999 - mine is 4.036

ECUTUNERS already shows where is 4.036 HEX file

but TANGO said something intresting - that I don't need use flasher.
I tried to update it one more time - without success.

[teamtuner]

it's for 3.999 - mine is 4.036

ECUTUNERS already shows where is 4.036 HEX file

but TANGO said something intresting - that I don't need use flasher.
I tried to update it one more time - without success.
ufff...
post image with printscreen with infos from ksuite
start ksuite and press info buton...then make printscreen and copy to Paint ...save image jpg and post here...will help you

[number7hd]

KESS is working finally...
On the forum are many not working scripts.
Today or tomorrow I will post program 100% working...

[tango]

program lololololol
you mean you have used the famous obd2buy software thats been around for ages that works for some and not others
other way would have been as said many times before
new sd card and update again etc etc etc