Help Mitsubishi lancer sportback

[carsandkeys]

Hi,

I have a Mitsubishi lancer sportback years 2009. All key lost, i'm triying program this with zed full, but not success. I precode the pcf7936 to cipper-biphase. but the zed full show error adding key. pcf now stay locked but not start. I tried too with skp 900, avdi, sbb and t-300. but this not connect, avdi say wrong pin code.

This cars have immo box MN141356 how i can generate a transponder? what is the fault?

Thanks in advance.

[key4man]

Hello, my friend
precode new chip id 46 pcf 7936 , and try to make key by obd using this code 8A32

[carsandkeys]

I try with 8A32 and 8A02 code but without success. I think that maybe they have changed the pin code of the immobilizer. I can extract this?

[p1et]

Hi,
This cars have immo box MN141356 how i can generate a transponder? what is the fault?

Thanks in advance.

24c16 eeprom there

[carsandkeys]

I dissambly this, i find the eeprom i think, but when i try read this with orange as st 24c16 or microchip 24lc16 this show error. i tried with x-prog too and nothing. Dead or wrong eeprom?

[ucokseparoh]

may be it's that smaller one...?

[p1et]

I dissambly this, i find the eeprom i think, but when i try read this with orange as st 24c16 or microchip 24lc16 this show error. i tried with x-prog too and nothing. Dead or wrong eeprom?

Wrong eeprom. Read the smaller one, circled in red:

[carsandkeys]

yes, my bad. here is eeprom dump. Please pincode.422085 Thanks you!

[p1et]

I can't give you PIN from dump. PIN code for this car should be 8A32 or 8A02 just like you tried. If you cannot program by OBD, you need program by dump with Tango, TM100 etc. Did you set biphase mode manualy? Or did you precode it for Mitsubishi and then it's in biphase mode?

[carsandkeys]

I take a pfc7936 virgin and precode to mitsubishi lancer with zed full and its convert the cipper-biphase. I try with another chip with EFfi, and with avdi to lancer id 46.

[dediegokey]

my freind, I use for this car a scantool called VeDisII

[carsandkeys]

solved. I program the transponder by dump with vvdi II as mitsubishi lancer X and cars start. Problem solved.

Thanks to all!