View Full Version : All key lost Scion TC 2005, help/information
electrones
23rd January, 2017, 09:30 PM
Hi friends
I have a Scion TC 2005, lost all key so i have read immobox 93C66, with AVDI in toyota special functions, i have dump tool option where i can select dump and it?s automatically recognized, i found option virgim/auto key registation and all these option say (first key inserted in ignition will be automatically programmed.
But i saw some differences between this dumps, someone have try this and worked!!!??
I have tried add this key, can someone tell if correct added, please!!
Car is so far...
Pg1-D2 LOCKED
Pg2-10 LOCKED
Pg3-369B6417 LOCKED
Cheers
ray-ray
24th January, 2017, 01:53 AM
4D 67 is the correct chip and your Toyota qwick reset orange dongle can program the key in a minute. You must program in a master first , a valet chip will not program I til it see a master first.
electrones
23rd February, 2017, 12:32 PM
4D 67 is the correct chip and your Toyota qwick reset orange dongle can program the key in a minute. You must program in a master first , a valet chip will not program I til it see a master first.
Hi friends
Can someone tell me if is possible add this keys like a master key
Pg1-30
Pg2-0A
Pg3-5E 7F 7C 03
ResP-4A658F 085725
OR
Pg1-B0
Pg2-65
Pg3-DD 15 4F 16
Resp-31EFA7 0E9076
Lexus master key can work for toyota!!!! i don?t have any for toyota
cheeras
ucokseparoh
23rd February, 2017, 01:46 PM
you need key with pg1 32/52.
pg1 30/B0 is id68.
did it work anyway?
electrones
23rd February, 2017, 02:33 PM
Thanks friend i found this transponder from a friend because i don?t have any here
Pg1-52
Pg2-2E
Pg3-8E753983
Resp-45F9AB B30048
Can someone add it for me please!!
CHeers
ucokseparoh
23rd February, 2017, 03:12 PM
try and report please..
430911
**If the car don't start try to bridge pin 4 and 13 for 40 minutes.
G'luck.
electrones
24th February, 2017, 09:53 AM
try and report please..
430911
**If the car don't start try to bridge pin 4 and 13 for 40 minutes.
G'luck.
Sorry for delay friend but security light stay flashing with key added in position 0 or 2
i tried jump pin 4-13 for mins but without success
i need help, please!!
Cheers
electrones
24th February, 2017, 11:14 AM
Can someone check pelase if i add this key correctly
Pg1-32
Pg2-35
Pg3-F0A79016
ray-ray
24th February, 2017, 04:25 PM
Did you check the Ariel, is it alive?
ucokseparoh
24th February, 2017, 04:51 PM
Scan the car mate.. may be the problem lies else where.
.
I believe key was added correctly.
Sent from my ASUS_T00F using Tapatalk
electrones
27th February, 2017, 11:53 AM
Did you check the Ariel, is it alive?
Yes ariel is ok, no doubt with new key added, security light is off but car still no work, try jump 4 and 13 for 40 min without successes
Scan the car mate.. may be the problem lies else where.
.
I believe key was added correctly.
Sent from my ASUS_T00F using Tapatalk
No other problem is immo probs, me too believe maybe transponder probs with new key added, security light is off but car still no work, try jump 4 and 13 for 40 min without successes, maybe someone can take a look in my dumps to check where is the fault
Thanks in advance
Cheers
ucokseparoh
27th February, 2017, 04:14 PM
I've tried to re-check your original file under different maker of Toyota and all ended up with the same generated-file as i gave you yesterday. Probably it needs to program the ECU as well as the dump is look alike a Toyota double storage system (though it slightly differ) :hmmmm2:
ucokseparoh
27th February, 2017, 04:19 PM
Yes ariel is ok, no doubt with new key added, security light is off but car still no work, try jump 4 and 13 for 40 min without successes
No other problem is immo probs, me too believe maybe transponder probs with new key added, security light is off but car still no work, try jump 4 and 13 for 40 min without successes, maybe someone can take a look in my dumps to check where is the fault
Thanks in advance
Cheers
As far as my concern if the security light is OFF that means key is recognized by immo. Did you scan the car mate? what is the scan result?
I did a Fortuner sometimes ago which had a pretty much the same symptom like yours.. security light is OFF but car won't start or even crank. Apparently the problem at that time lies in the fuse box and starter-relay/wiring.
electrones
20th March, 2017, 11:08 PM
Scan the car mate.. may be the problem lies else where.
.
I believe key was added correctly.
Sent from my ASUS_T00F using Tapatalk
I've tried to re-check your original file under different maker of Toyota and all ended up with the same generated-file as i gave you yesterday. Probably it needs to program the ECU as well as the dump is look alike a Toyota double storage system (though it slightly differ) :hmmmm2:
As far as my concern if the security light is OFF that means key is recognized by immo. Did you scan the car mate? what is the scan result?
I did a Fortuner sometimes ago which had a pretty much the same symptom like yours.. security light is OFF but car won't start or even crank. Apparently the problem at that time lies in the fuse box and starter-relay/wiring.
Hi m8
Sorry for delay in report, but car is solved a weeks and u are right problem wasn't in immo but in ignition coil system all ready solved thanks for your support and attention
Cheers
jmautoman
18th February, 2021, 08:01 AM
Hi
Could someone help with location of immo box on the SCION tc 2005??????? Please HELP
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.