PDA

View Full Version : FG tech galletto v54 rework



ECUCONNECT
28th January, 2017, 08:00 PM
after rework the voltage with no conection to car is 29 volts
don?t now wath is the probem some one can help??
tnhaks

hk06
28th January, 2017, 08:30 PM
did you install the driver

hk06
28th January, 2017, 08:31 PM
it's not normal voltage of car is12v

pulsar2000
28th January, 2017, 08:48 PM
after rework the voltage with no conection to car is 29 volts
don?t now wath is the probem some one can help??
tnhaks

so you reworked and now 29v recheck your work, check component values against what you fitted, was it a kit off a member so you know good parts ? or did you source yourself ?
best case scenario you dropped a bollock and you can fix, check your solder work, did you use Hotair ? if so make sure you didnt blow any small components off solder pads,

tango
29th January, 2017, 05:57 PM
how you testing this voltage?

if not connected to any vehicle? the unit gets power from the vehicle (12v or 24v)
only other power is 5v from usb

gazvts
29th January, 2017, 06:44 PM
Can you post hq picture ?