cas4 5m48h via xprog

[digital320]

Hello d.k. people..today I need to read/write 5m48h with xprog..did anyone try to read that mcu without lifting pins like r270/r280 pinouts..I hate lifting them..

[Tbolbi]

hello
you can try with R280 its easy
check picture

[digital320]

yes I see this before..but dont have r280 at the moment only r270 and oem xprog..maybe stupid but you think r270 is able to read this mcu or will kill it if I chose 1l15y and use new pinout?

[Tbolbi]

hi
R270 is not able to read it elso xprog its very hard to read CAS4 .. maybe its bettre if you get R280 or you buy original tools for this.
i have R280 i use it just 1 time it was ok but i always use original tools for this work.

[digital320]

I now what you talking about mate..It is very hi security mcu but my oem xprog never failed on cas4 5m48h it is only lifting pins whats bodow me..r270 work perfect on 1L35Y also..thats why I ask if anyone had try to read without lift reset like rosfar does..or any better idea becouse its veri risky lifting them espesialy if need to work 2x or 3x...

[Tbolbi]

hi
using xprog you have no other solution to read it without lifting pins. if you want so buy R280 or others tools