View Full Version : Bmw EWS-DDE sync
immokill
30th January, 2017, 12:19 PM
Hello
I dont have inpa here can somebody sync this ews and dde . It is 320d edc16
Thanks
Regards
Gavra
30th January, 2017, 12:56 PM
Files are synchronized , you have cks error in ECU, fix with BDM and do sync over obd ,after it will start.....
immokill
30th January, 2017, 01:14 PM
I dont have inpa here . Why to do sync with inpa if synced.?
baltazar3
30th January, 2017, 01:18 PM
I dont have inpa here . Why to do sync with inpa if synced.?
You have to fix CHK with BDM100 first.After that you have to perform alignment DDE-EWS.
immokill
30th January, 2017, 01:53 PM
Ok . I dont have car here . Can aligment do somebody without car only with files above?
gixerke
30th January, 2017, 07:13 PM
Hi.
Upload the ecu and try ews-dde sync.....
immokill
30th January, 2017, 08:33 PM
After checksum now i have ews manipulation and tomorow i must go 200km to allign ews _ dde via inpa or pasoft 1.4 . Thank you all for helping
Послато са HUAWEI SCL-L01 уз помоћ Тапатока
dijo
31st January, 2017, 12:47 AM
Here you have dump with ISN and CS corrected:
I have mix up file name with ews, but all ok...
immokill
31st January, 2017, 09:20 AM
Thanks . Car will start without inpa?
dijo
31st January, 2017, 02:14 PM
Tis dump is ECU flash...
no, you will need to aligned any way...
Masterprog
31st January, 2017, 02:40 PM
hello if you have EWS manipulation you dont havre choice, put a good batterie , delette all dtc and do sync with inpa or avdi or Dis, you need only a cable K+Dkan and lanch your syncro ...
immokill
1st February, 2017, 07:12 PM
All ok did it with inpa ...[emoji125]
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.