AGDiag
1st February, 2017, 03:37 PM
Hello,
I am dealing with a problem on a KIA Cee'd 1.4 petrol from 2007.
The ABS light is ON. The client said it appeared while driving , the servo-steering was not working properly and he noticed the smell of burning plastic from the front left wheel. The problem is that I can't connect with my Delphi on the ABS module, but I can connect on the ECU and the Power steering.
I have checked the wires that go into the ABS module, I have +12V and ground and I also checked the wire from the ABS module to the OBD connector in the car.
Am I wrong thinking that the ABS module is faulty or my Delphi just can't connect with the ABS on this car and it probably has a faulty ABS sensor?
I am dealing with a problem on a KIA Cee'd 1.4 petrol from 2007.
The ABS light is ON. The client said it appeared while driving , the servo-steering was not working properly and he noticed the smell of burning plastic from the front left wheel. The problem is that I can't connect with my Delphi on the ABS module, but I can connect on the ECU and the Power steering.
I have checked the wires that go into the ABS module, I have +12V and ground and I also checked the wire from the ABS module to the OBD connector in the car.
Am I wrong thinking that the ABS module is faulty or my Delphi just can't connect with the ABS on this car and it probably has a faulty ABS sensor?