A3 8P 2005 abs coding

[offsystem]

Hi!

i got here a a3 8p someone changed the cluster, VDO 93C86 with carprog, CS vin from engine ecu
car start fine,

problem is since he changed the cluster he always has the problem

03 incorrect ABS coding

can this be of a not correct immoadaption?

coding of abs unit is 100% correct,
it has ESP FRONT MK60 0104

[pwrider]

Hi,
Immo has nothing in common with abs coding.
I'm not sure if it's the same, but I got the same problem with VW Tiguan 2012, when i changed instrument cluster from USA version (in miles) to Euro version (in km).
Abs was originaly coded to miles(North America) and was not compatible with cluster coding which was km (RestofWorld).
I got the same error in abs. When i changed coding problem disapeared.

[gttuning]

Hi!

i got here a a3 8p someone changed the cluster, VDO 93C86 with carprog, CS vin from engine ecu
car start fine,

problem is since he changed the cluster he always has the problem

03 incorrect ABS coding

can this be of a not correct immoadaption?

coding of abs unit is 100% correct,
it has ESP FRONT MK60 0104
I think abs coding is bad. abs coding gose 00000000 once they program new cluster.after that paste old coding and should be fine.
Maybe the write back wrong coding for pump.


Sent from my SM-G935F using Tapatalk

[offsystem]

coding was checked by odis online

[gttuning]

coding was checked by odis online
I had a leon not long time ago and was changing cluster and i seen Tpms build in to cluster and there was a option for external tpms in coding helper..maybe something like that is you problem.
And try recode pump again with same coding.

Sent from my SM-G935F using Tapatalk

[kiszka]

..................

[offsystem]

17526 1.9tdi without measuring tire pressure
3190 2.0tdi without measuring tire pressure
1142 1.9tdi with measuring tire pressure
19574 2.0tdi with measuring tire pressure

1K0 907 379 K
Bauteil: ESP FRONT MK60 0104
Codierung: 0023174


2,0 TDI without without tire pressure

[kiszka]

................

[EMCE159]

After changing cluster you have to perform basic settings in abs. After that errors should gone. http://wiki.ross-tech.com/wiki/index.php/Audi_A3_(8P)_Brake_Electronics_(MK60)#Basic_Settin g