View Full Version : help read bsi for peugeot 508 2014 model
cyril
14th February, 2017, 10:34 PM
hello friends pls i need help to know if want to settle mileage for peugeot 508 2014 model if there is points in the bsi i can solder wires on them or i have to open the bsi and how
thanks
jomberykaso
14th February, 2017, 11:26 PM
same pinout for peugeot 208, 301, 3008, 308, 508, 5008...BSI VALEO
cyril
14th February, 2017, 11:38 PM
thanks friend but this BSi is continental
help pls
jomberykaso
15th February, 2017, 12:45 AM
you must open this Bsi, if you have the appropiate tools it will be an easy job....
Good Luck mate...
cyril
15th February, 2017, 12:51 AM
no other solution? cuz there is many connectors on it
jomberykaso
15th February, 2017, 12:56 AM
...................
428722
SergeyIg
15th February, 2017, 12:42 PM
4 brown connector holding
It is necessary to remove the four brown connectors, they hold
Eeprom 95256
cyril
15th February, 2017, 10:00 PM
hello friends i ope the bsi ad read the bsi eprom but can i get it to renew the file to 0 current mileage is nearliy 15400 km
thanks
cyril
15th February, 2017, 11:03 PM
help plssss
juancho18
15th February, 2017, 11:38 PM
Milege original no is 15400
is 14542
cyril
15th February, 2017, 11:41 PM
yes u r write its my mistake can we put it 0 pls
juancho18
15th February, 2017, 11:49 PM
Mmm it only leaves up to 100 my cal
Although I do not know why you want 0
You need to calibrate dash too.
cyril
15th February, 2017, 11:51 PM
ok 100 if ko 0 i was aking 0 may i will change the dash but 100 will be ok pls if not possible 0
juancho18
16th February, 2017, 12:00 AM
try and report
dash is 95080
Hugoreisf
11th November, 2018, 03:29 PM
4 brown connector holding
It is necessary to remove the four brown connectors, they hold
Eeprom 95256
How did you get to separate the two boards? im trying but im afraid to break. Any tip?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.