PDA

View Full Version : Toyota Avensis 2007y D4D 2.0D DPF off



Dawiww
15th February, 2017, 05:06 PM
Hi!

I have a Toyota Avensis 2007y with 2.0 Diesel 126 HP.
Cars is having troubles with DPF. Readed codes with G-Scan and...:
P0488 EGR Throttle Position Control Range/Performance
P1428 Particle Filter pressure sensor - high level
P2002 Diesel Particulate Filter (DPF) Efficiency Below Threshold Bank 1
Propably DPF died.
Taken ECU (stupid position behind glovebox) and... will tried to red.
ECU is:
Toyota 89661-05A51 MB175800-9510 DENSO A5
How to read? Kess cant touch it, doesn't even have a Avensis. Then left KTag. Somewhere at ethernet found that Denso Ecu need to be readed via JTAg Renesans. Is this true? Then which family need to choose? Pinout?

PS. Will take a photo of sticker on ECU, if needed http://www.mhhauto.com/images/smilies/smile.gif

Thanks in advance! http://www.mhhauto.com/images/smilies/smile.gif

hcwc
15th February, 2017, 06:40 PM
You can read this ecu only with original tools like cmd, ktag
Ktag euro clone 7.026 can read it too ;)

Dawiww
16th February, 2017, 09:39 AM
Ok, i have a kess v2, 97% sure clone, with 4.036fw and Ktag 6.070 (doesn't remember correctly). So... probably can't do that with this stuff.


What about emulator? Is it worth fitting? Need to do anything except connecting?

SvenR1
16th February, 2017, 07:04 PM
Ok, i have a kess v2, 97% sure clone, with 4.036fw and Ktag 6.070 (doesn't remember correctly). So... probably can't do that with this stuff.


What about emulator? Is it worth fitting? Need to do anything except connecting?

For emulator, find good one, cheapest wont reset themself after regen cycle counter! Just connect it and you are good to go, but car have to have atleast one working temp sensor and differential sensor also, they needed for emulating/cheating.

Contact me I will give you good source to buy!