View Full Version : ML320 W164 2006 crash clear please.
r_parev
15th February, 2017, 06:02 PM
Please clear crash.
MB ML320 W164 2006
Bosch 0285001535
SW 2005
HW 2005
A1648204326
eeprom 95640
Thanks.
andrewsh
15th February, 2017, 07:14 PM
did you try using das engeneering menu?
das->adaptation->crash counter reset?
das->engeneering-> level1 access\level2\ entrigeln . on\off ignition. level 1 \ vergieln?
andrewsh
15th February, 2017, 07:20 PM
or try this file and send ask - it work or not
428913
r_parev
15th February, 2017, 08:01 PM
I try and report tomorrow.
Thanks for help.
r_parev
18th February, 2017, 07:33 AM
Hi andrewsh (http://www.digital-kaos.co.uk/forums/member.php/502453-andrewsh)
this file not work
Any other help please.
Fault Codes
============================================
AE65 Airbag control module - Internal fault
9200 The ignition circuit with component R12/7 (Right rear ETR ignition squib) has Short circuit to ground.
9260 The ignition circuit with component R12/11 (Left rear side airbag ignition squib) has Short circuit to ground.
9280 The ignition circuit with component R12/12 (Right rear side airbag ignition squib) has Short circuit to ground.
9210 R12/3 (Driver airbag squib) - Resistance too large
9220 The ignition circuit with component R12/20 (Left front side airbag ignition squib) has Short circuit to ground.
9230 R12/4 (Front passenger airbag squib) - Resistance too large
9600 Airbag control module - Internal fault
Thanks.
r_parev
18th February, 2017, 04:14 PM
Any help please?
AUTODIAGNOZA
18th February, 2017, 11:00 PM
Try this.......
andrewsh
19th February, 2017, 08:26 AM
did you install new ab? error 92xx - install 2Ohm resistant to this module.
Hiandrewsh (http://www.digital-kaos.co.uk/forums/member.php/502453-andrewsh)
this file not work
Any other help please.
Fault Codes
============================================
AE65 Airbag control module - Internal fault
9200 The ignition circuit with component R12/7 (Right rear ETR ignition squib) has Short circuit to ground.
9260 The ignition circuit with component R12/11 (Left rear side airbag ignition squib) has Short circuit to ground.
9280 The ignition circuit with component R12/12 (Right rear side airbag ignition squib) has Short circuit to ground.
9210 R12/3 (Driver airbag squib) - Resistance too large
9220 The ignition circuit with component R12/20 (Left front side airbag ignition squib) has Short circuit to ground.
9230 R12/4 (Front passenger airbag squib) - Resistance too large
9600 Airbag control module - Internal fault
Thanks.
r_parev
19th February, 2017, 02:18 PM
Thanks AUTODIAGNOZA, but file not work- Internal fault
--- electronic control unit identification ---
Mercedes-Benz No. : 1648204326
ECU Origin : DCS
Supplier : Bosch
Hardware Version : 05 / 20
Software Version : 05 / 20
Fault Codes
============================================
9280 The ignition circuit with component R12/12 (Right rear side airbag ignition squib) has Short circuit to ground.
9260 The ignition circuit with component R12/11 (Left rear side airbag ignition squib) has Short circuit to ground.
9600 Airbag control module - Internal fault
429862
andrewsh
19th February, 2017, 07:49 PM
just use das for work with that.not abrites.
write original dump -> and after that
das engeneering menu
das->adaptation->crash counter reset - it reset your crash data
das->engeneering-> level1 access\level2\ entrigeln . on\off ignition. level 1 \ vergieln -it reset ecu error 9600
r_parev
19th February, 2017, 09:16 PM
Hi andrewsh.
Sorry for the stupid question, but where is this menu?
My DAS is no such menu (adaptation and engeenering)
DAS is new to me, today is my first time.:giveup:
429946
zemunac
4th May, 2017, 06:44 PM
ML320 W164 2006 crash clear please.
Please clear crash.
MB ML320 W164 2006
Bosch 0285001535
SW 2005
HW 2005
A1648204326
eeprom 95640447673
zemunac
4th May, 2017, 06:50 PM
Please clear crash.
MB ML320 W164 2006
Bosch 0285001535
SW 2005
HW 2005
A1648204326
eeprom 95640
447675
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.