PDA

View Full Version : PASSAT 1.9tdi pd 130hp stage 2



Ignasvw
16th February, 2017, 06:54 PM
hello guiz,i have moded my car , original it has 130hp,but now 170hp and 408nm. after chiptunning i had little bit of smoke, after that my turbo broked down ( started to fill out oil to exaust), The turbo was also litle bit modified, it was hibrid. So i bring that turbo to the turboservice, They didnt know from what cars that turbo was,so they made a new hibrid turbo from bmw3d(142kw) and passat 2.0 140hp. Now abstolutely no smoke,turbo makes monster noise when drops pressure. it goes almost to 1.7bar on third gear full load. So i think i need stage 2. need more fuel and maybe little more turbo, so maybe someone can make my program to stage 2? And also if someone want,can upload my program , im using it for maybe 3years,everything is fine. hot start fixed. Sorry for my bad english.

pioottr
16th February, 2017, 07:30 PM
You must change n75 map, 1.7 bar is to much, 1.5 its enough.

Ignasvw
16th February, 2017, 09:08 PM
Thanks for the reply. Its good for me too have boost like that,my svbl is on 2750, turbo boost 2640(max value that i found while testing it). I think with boost like that i need more fuel,because now there is now black smoke at all,and i think giving more fuel will increase more power on my car

Ignasvw
17th February, 2017, 10:50 AM
maybe someone can help?

Act Tuning
17th February, 2017, 12:51 PM
You need good custom tuning, i dont think you find perfect remap for free.

Mundexxx
22nd March, 2023, 08:12 PM
hello, maybe you found someone who helped with stage 2?

danypk
23rd March, 2023, 02:10 PM
hello guiz,i have moded my car , original it has 130hp,but now 170hp and 408nm. after chiptunning i had little bit of smoke, after that my turbo broked down ( started to fill out oil to exaust), The turbo was also litle bit modified, it was hibrid. So i bring that turbo to the turboservice, They didnt know from what cars that turbo was,so they made a new hibrid turbo from bmw3d(142kw) and passat 2.0 140hp. Now abstolutely no smoke,turbo makes monster noise when drops pressure. it goes almost to 1.7bar on third gear full load. So i think i need stage 2. need more fuel and maybe little more turbo, so maybe someone can make my program to stage 2? And also if someone want,can upload my program , im using it for maybe 3years,everything is fine. hot start fixed. Sorry for my bad english.

Here you go, your file, added some duration and boost to match what u said 1.7bar.
Test and report!
Pass pm

BR

alonedark
23rd March, 2023, 09:31 PM
Perfect tuning jijijiji

Ignasvw
27th March, 2023, 10:59 AM
Are we doing 6yrs old attachments? :pcguru:

Johnsy1998
27th March, 2023, 01:08 PM
I can help you with proper calculations made??? if still needed anyway.

Johnsy1998
27th March, 2023, 01:32 PM
Here's your file, calculated to run 1.7BAR @70MG