nissan qashqai key programing fault

[darox2005]

Hi Lads , i have some problem with Nissan qashqai 2007 petrol , i try programming key with remote function pcf7946 , but not success i use skp900 , for this , then skp900 shoving key add success but not programming , when i try use FVDI ther no connection to immobiliser , also i try use only 7936 transponder and still the same , any idea what happen , also then pin must be 4 digit for this car or 12 digit , Fvdi shoving only 4 digit and skp900 too , Thanks for any help .

[gttuning]

Hi Lads , i have some problem with Nissan qashqai 2007 petrol , i try programming key with remote function pcf7946 , but not success i use skp900 , for this , then skp900 shoving key add success but not programming , when i try use FVDI ther no connection to immobiliser , also i try use only 7936 transponder and still the same , any idea what happen , also then pin must be 4 digit for this car or 12 digit , Fvdi shoving only 4 digit and skp900 too , Thanks for any help .
Had one last week it was 2011 if i use old pin car would only start no remote could get program i had to use new pin to make key start and then remote worked..maybe some thing like this is your problem.
I use avdi.

Sent from my SM-G935F using Tapatalk

[super jumbe]

Have you tried X100 pro? You never know! http://www.digital-kaos.co.uk/forums/images/smilies/hmmmm2.gif

[rapidlocksmiths]

there has been a post a long while back where skp900 did similar and corrupted car , it had issues on qashqai , not sure if ever fixed as i use truecode or avdi on these without issue , but i know after this thread a good few wouldnt try qashqai with skp900 .

truecode does these in seconds and never had issue , by far the best kit ive used on its nissan coverage

[instakeys]

I find some Nissans can just 'not do it' sometimes. Dreaded P1610 immo locked fault i've had more times than I can remember...
Try coding keys with everything in my arsenal - no cigar. Couple Qashqais it's happened on, P12 Primeras etc...

If all else fails, rip out the BCM and do the tango

[obdsystems]

had one where both fobs wouldn't work but started - turned out to be an ignition fault.


they have their issues guess being 50% renault :chuncky:

[darox2005]

Thank lads for help i need buy some proper tool for Nissan , What about Nissan Consult 3 plus , can be do key and reprogramming ECU , someone hast testing this tool , i talking about clone Nissan Consult 3 plus , also i would like ask about Truecode for Renault , can be done Clio 4 or not ?

Thanks

[rapidlocksmiths]

clio 4 is not currently supported on truecode renault .

[autochei]

it s was lost key or add?

try with door lock closed

and in final press brake and start the car