View Full Version : BMW edc17cp45 boot pin
yeager
18th February, 2017, 07:53 PM
hi, exist a boot pin for this ecu in front side? i cant disassemble it, i have tire that i damage it or will broken ...
dominik.m
18th February, 2017, 08:01 PM
It's not possible in front side.
dominik.m
18th February, 2017, 08:04 PM
It's my solution 100% ok.
smirnoff_rules
18th February, 2017, 08:07 PM
how close is the board from the metal ?
dominik.m
18th February, 2017, 08:08 PM
about 3 millimetres
yeager
18th February, 2017, 08:21 PM
and read write obd2 not possible? i can read flash whit gal2 in obd as bmw series 7 edc17co02/06 ... write will work too?
smirnoff_rules
18th February, 2017, 08:25 PM
people wouldnt risk cutting into case of ecu if it was
icezero2010
18th February, 2017, 08:27 PM
this ecu is simple to open complete check youtube edc17cp45 open
https://www.youtube.com/watch?v=mUOrKiZzIL0
konq100
18th February, 2017, 08:36 PM
With CNC router is better instead of flex or dremel.
https://www.youtube.com/watch?v=11gn0N_le4E
gttuning
18th February, 2017, 08:37 PM
Simple until you damage one and its not that simple after.
Sent from my SM-G935F using Tapatalk
gttuning
18th February, 2017, 08:40 PM
Same like edc16c31 Mercedes.
I open maybe 7 of them with out any issue and my own sprinter van brook.
So i need open ecu and brick.
From now on i cut for bdm access if i need.
Sent from my SM-G935F using Tapatalk
smirnoff_rules
18th February, 2017, 08:42 PM
this guy should be a butcher lol
https://www.youtube.com/watch?v=K72JZYmz1H4
yeager
18th February, 2017, 08:59 PM
i open it, reading now ... can someone make a goodremap, whit dpf inside?
yeager
18th February, 2017, 09:27 PM
can someone make a good remap whit dpf inside?
dominik.m
18th February, 2017, 09:40 PM
Today it is already for late on work. If you will want , then on Monday write.
yeager
18th February, 2017, 09:41 PM
I must take back ecu tomorrow :(
icezero2010
18th February, 2017, 10:35 PM
I must take back ecu tomorrow :(
here your file test and report do chk with tool pass pm
icezero2010
18th February, 2017, 10:42 PM
this guy should be a butcher lol
https://www.youtube.com/watch?v=K72JZYmz1H4
this man is crazy :-) but the pcb is from ecu is really stable . its some harder to open a mercedes delphi crd 2 .
dominik.m
19th February, 2017, 12:32 AM
Your file DPF OFF MOD. Test and r.....
icezero2010
19th February, 2017, 01:25 AM
Your file DPF OFF MOD. Test and r.....
why dpf off he will tuning without dpf off :-)
dominik.m
19th February, 2017, 02:11 AM
Priv tell me something another.
mislav88
19th February, 2017, 01:37 PM
this ecu is simple to open complete check youtube edc17cp45 open
https://www.youtube.com/watch?v=mUOrKiZzIL0
did 4 of them this way and all seemed to be ok, 5th went dead after a week (would work when you bend it, or put something in housing to keep pcb spanned). i cant risk customer calling me his ?50k car just stopped 1000 miles from me...
since then i use this:
429855
icezero2010
19th February, 2017, 02:18 PM
did 4 of them this way and all seemed to be ok, 5th went dead after a week (would work when you bend it, or put something in housing to keep pcb spanned). i cant risk customer calling me his €50k car just stopped 1000 miles from me...
since then i use this:
429855
i have done more than 40 cars no have problem since 2013
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.