about BCM2 how read eeprom

[pouleddy]

Hi, i have a BCM2 on the table i dismount it and i solder by connect avdi wiring to bcm2 board and i read the data i think this is flash data, so i don't found in it eeprom, in this case how i can get pin + cs ? i just have bcm, did any one know if there is any option to have read eeprom?, i load the data in avdi bcm2 system which i read it by soldering, avdi show me key count + vin + power class. i need to have pin + cs, to write it in engine unite. any idea how get eeprom memory? thanks in advance...

[koyot]

post flash and data to get cs and pin

[pouleddy]

Dear, i just have flash, how to read eeprom? in the bcm2 i don't found eeprom. so we can calculate just by flash dump the pin + cs ? i think no... any idea?

[koyot]

whit tool read

[pouleddy]

can you tell me with which tool read eeprom? which tool has option it show us read eeprom? in avdi there is no option it show read eeprom, if you mean by programmer i write above 2 times there is no eeprom in this bcm2. so ???

[koyot]

read with orange ou smok MultiProg

[Gavra]

You can't read eeprom,it's emulated, you need to read code flash and data flash...........

[amigokola]

Multiprog read's only BCM type with eeprom I think.

[koyot]

however all this is true
just as individuals do not know what is eeprom and what is emulated EEPROM
they have neither the knowledge nor the tools.
They have only the instructions provided by various retailers



EEPROM not only 8-pin

[lush29]

Multi pr... reads bcm no prob did one last week.

[solitaire]

can you tell me with which tool read eeprom? which tool has option it show us read eeprom? in avdi there is no option it show read eeprom, if you mean by programmer i write above 2 times there is no eeprom in this bcm2. so ???
read data flash

429948

[pouleddy]

Hi. the info photo of solitaire it accept to me read the data flash by abprog avdi, after i try load this dump in tango load eeprom its accept, but i loud the flash too not accept, tango it show me (error:short dump. Expected lenght MIN 256KB) did any one here have idea what option or size i must choose from apbprog avdi to have correct size read flesh? to can tango accept calculate?. i try read 512kb 128kb 256kb but tango not accept to calculate, error always or too short dump or dump seems doubtful. please any help...

[solitaire]

flash upd70F3381

[pouleddy]

thank you solitaire its done. just one more question if tango don't show me the pin this mean its immo 5 the bcm2 ? tango its show me vin + key count + power class + CS (without pin code) any info about my question.

[koyot]

post dump to get pin

[pouleddy]

this is the dumps.

[koyot]

your bcm data is destroyed
pin 00000
cs 08C5BE0D20241E
vin WAUSGAFC9Cxxxxxxx
key counter 03
config 000000

need repair immodata in bcm

[pouleddy]

your bcm data is destroyed
pin 00000
cs 08C5BE0D20241E
vin WAUSGAFC9Cxxxxxxx
key counter 03
config 000000

need repair immodata in bcm
Dear the car starting no problem, any way how repair the immodata in bcm ?

[koyot]

pin 00000

see also show pin same in ecu its ok
no need repair
strange pin 00000

[pouleddy]

pin 00000

see also show pin same in ecu its ok
no need repair
strange pin 00000
i try lot of time on table to get pin from ecu, but avdi can't read immo parts, always have error, i try turn ignition on more then 30 minute but same can't leave me the system to enter ecu.

[Ter]

Hello members. What is the best tool to read BCM2 with? I have 3 locked BCM2 from Audi A8 and VW Touareg 2012. Please show can help me unlock these online or point me to a tool that can do this job? I will appreciate urgent help.