toyota rav4 2013-2014 odometer need help please 93c66

[aleppo007]

hi all friends, i have a toyota rav4 2014 it has a 93c66 chip. very very small. i cannot solder it to reading chip cause its too small and i dont have a small adapter for its size. but it can be done with some pinout wires. can anyone help me with pinouts so i dont take the chip off. thanks in advance

[car_soft_gorj]

read eep and post dump !

[antenor]

read eep and post dump !

That is the problem.....:captain:

[aleppo007]

i know how to do the odometer change but the problem is the chip is too small so i need a way to weld the wires on the board instead of the eeprom

[Dr. Zoidberg]

Read in circuit to 3.3 volt,if you can liftup pin 8 VCC, So you do not "wake up" the processor.

[aleppo007]

this model can be done by eeprom not processor. the only problem is its very small and dont have an adapter. even smaller than new subarus. i just need a way to solder wires on to the board and if anyone knows a way to do so.

[Dr. Zoidberg]

You did not understand me....

[aleppo007]

can you explain more

[captain crackers]

Qute simple. Using a fine tip, solder to pins 1,4,5,8. Trace the tracks from pins 2 and 3 back. If you can't find points to solder to, scrape the tracks to bare copper where you are comfortable to solder to. When finished, buy yourself a zif socket or programming boards as this will not be the only one you will see. Arthur.

[rukartinatv]

He ask for pdf
there is the solder points for civick
that what he ask

[epd1221]

I just did one on Saturday trace the tracks points with a voltmeter and weld in different spots not in eeprom

[ascrap2003]

I just did one on Saturday trace the tracks points with a voltmeter and weld in different spots not in eeprom

Wow wisdom in the making why didnt I think of that? lol

SO question when you trace do you find the closest soldering point period? what if it goes thru other compenents? I think I already know the answer but hey what the hell.
Also from a programming point of view which is safer soldeing to points, soic clip or probe clip grabber thingys?

I feel like number 5 "Need more input" lol

[aleppo007]

yes i need pdf or photo
there is the solder points for it

[aleppo007]

i can't found the solder point

[clusters]

If you don't have an adapter, solder to chip legs with Kynar wire (30awg) on the ends of you cable.

[aleppo007]

thanks i try

[zckariya70]

430243


Here is the connections for u ...

[rabeesham1]

Easy ,,
Do u have heater ?


Sent from my iPhone using Tapatalk

[vrsc]

Tssop resolder is the best Solution.

This is my First Version to Programm Rav4.

[shanny254]

does anyone have this rav4 dump for the cluster i have a damaged dump..please help

[nikz]

try this......................

[doctore]

hi guys can someone change km to 137453 on rav4 2008

I highly appreciate it

thanks in advance:)

[vageric]

hi guys can someone change km to 137453 on rav4 2008

I highly appreciate it

thanks in advancehttp://www.digital-kaos.co.uk/forums/images/smilies/smile.png

try this and report

[doctore]

thanks may friend but km its same 272033

[zckariya70]

Here................