PDA

View Full Version : 2015+ KIA SORENTO - FUJITSU MB91F067 - Tool Recommandation


JandJSpeedShop
20th February, 2017, 04:58 PM
I have a customer with a 2016 KIA SORENTO and doing some research here saw Landetos post with some information on memory located as "FUJITSU MB91F067"

I currently have nothing to program this vehicle and was looking for a solution, suggestions on what to purchase??
junmab
20th February, 2017, 05:44 PM
I got the SMOK JTAG, that has the FUJITSU MB91F067 in it's list,but unfortuntely the guys at smok are not answering to questions, and since no one in the forum has an idea how to connect to this mcu, i recomend you to purchase an obd tool for this job.
JandJSpeedShop
20th February, 2017, 10:03 PM
I got the SMOK JTAG, that has the FUJITSU MB91F067 in it's list,but unfortuntely the guys at smok are not answering to questions, and since no one in the forum has an idea how to connect to this mcu, i recomend you to purchase an obd tool for this job.

Yes looking for a bang for the buck option.
XmoDDeR
21st February, 2017, 09:19 PM
smelecom with said options
JandJSpeedShop
21st February, 2017, 09:32 PM
smelecom with said options

What tool are we talking about I see they have a few on the website?
janushaan
22nd February, 2017, 02:47 PM
looks like carprog has option

http://www.codecard.lt/carprog/software/dashboard/s7-46-internal-eeprom-data-flash-repair-with-a10-adapter-for-fujitsu-mb91f061/prod_2394.html
billykillkelly
22nd February, 2017, 03:46 PM
obdstar d type works like charm...
Berubeg
22nd February, 2017, 05:52 PM
No succes for me on Elantra 2017 with same mb91f067 with bcm2 adaptor
XmoDDeR
23rd February, 2017, 02:13 AM
really hmmm my guy just do 2
JandJSpeedShop
23rd February, 2017, 02:50 AM
obdstar d type works like charm...

I have the OBDStar X100pro just updated it and the processor aren't even listed under Sorento. I only have the 24c16 and a choice of 2 NEC processors
Berubeg
23rd February, 2017, 03:04 AM
Talk with help desk and like have my cluster for test. You make it with bcm2?
XmoDDeR
23rd February, 2017, 08:38 AM
I have the OBDStar X100pro just updated it and the processor aren't even listed under Sorento. I only have the 24c16 and a choice of 2 NEC processors


cheap
tool getting massive response in mexico
XmoDDeR
23rd February, 2017, 08:39 AM
Talk with help desk and like have my cluster for test. You make it with bcm2?

why
do i need help desk we have done about 7 or 8 so far , get them in mail too
junmab
27th February, 2017, 05:10 PM
I succeded to do a job with smok jtag on mb91f067cs. Job is done very easy using microcalc2 from smok.
Berubeg
27th February, 2017, 06:14 PM
Sorry for my English xmodder. I'm talk with help desk...and like have my cluster for test the software. 2 month ago.
JandJSpeedShop
24th March, 2017, 06:36 AM
BUMP still looking??
ghassanabed1122
16th May, 2017, 07:25 PM
plz can u send to me the diagram booting for it . i have same device and same job
thank a lot my friend
systemlinux
2nd October, 2020, 07:03 PM
Looking for I found this thread, which I have the same SANTA FE 2.2 2016 case with the same micro and I cannot have an exact diagram or someone has been able to read it.


- LAUNCH, AUTEL, FVDI 2020 by OBD cannot be done, this micro does not appear on its list.


- XPROG and UPA are not connected for this micro