View Full Version : Help reading Hitachi MEC15-010
Ahmy501
22nd February, 2017, 10:32 AM
Has anyone managed to read this ECU Hitachi MEC15-010 on bench what are the required gears to accomplish this seems like the only method is Renesas. please share your thoughts and experiences.
Thanks
430519430520
Ahmy501
22nd February, 2017, 09:28 PM
bump!!!!!!!
Ahmy501
23rd February, 2017, 08:08 PM
bump!!!!!!!
dominik.m
23rd February, 2017, 09:30 PM
You can make picture inside Ecu?
Ahmy501
24th February, 2017, 08:10 PM
You can make picture inside Ecu?
Looks like there`s a bdm port on the pcb board
431252
Ahmy501
3rd March, 2017, 02:33 PM
Looks like there`s a bdm port on the pcb board
431252
Any one experienced with this ECU
Ahmy501
3rd March, 2017, 10:27 PM
Got more info, this ECU is SH705x based that uses MCU 64F7055F40 this ECU is very similar to the Patrol`s ecu TB4.8 6L as well as the Patrol 4.8 there`s a JTAG port on the board FG tech does not list that ecu on the JTAG manual. anyhelp
4.8 JTAG
432982
dominik.m
3rd March, 2017, 11:16 PM
Did you try to connect like on picture? You should connect power supply 12v too.
Ahmy501
3rd March, 2017, 11:33 PM
Did you try to connect like on picture? You should connect power supply 12v too.
The diagram on the picture is a little bit different from the ECU i have, the diagram shows to flip transistors and connect the 5 links on the back of the board.
The back of my ecu board is different i can`t locate the pins also the transistors flip location is not known on my ecu board. I need proper diagrams for MEC 15-010
Attached is an example of 4.8 patrol ECU transistors flip + 5link connection
433000
433001
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.