PDA

View Full Version : VW Polo 1.2 AZQ SIMOS3PE Idle map



xdamdamx
25th February, 2017, 09:50 AM
Hello friends!

As SIMOS ECUs are strange for me ;) mabye you could help me.
I'm looking for idle RPM map in function of ECT, or any other map to
raise idle by 100-150 in all range.
Tried to change some 8bit 6x1 maps, but no luck.
adaptation in channel 1 works OK but only for 1-2 minutes, then it goes back to 128.
in attachement is read by external programmer.
Thanks for any kind of help.

regards,
damdam

d3v1l
25th February, 2017, 01:13 PM
You Can raise the idle with diagnostic tool as kts bosh or wag, there is always for the wag this option

xdamdamx
25th February, 2017, 01:28 PM
yes i can, adaptation channel 001. but it does raise only for a few seconds, and then goes back to 128 value... it's a known issue of this SIMOS3 ECU.

NOX
25th February, 2017, 02:58 PM
Hello friends!

As SIMOS ECUs are strange for me ;) mabye you could help me.
I'm looking for idle RPM map in function of ECT, or any other map to
raise idle by 100-150 in all range.
Tried to change some 8bit 6x1 maps, but no luck.
adaptation in channel 1 works OK but only for 1-2 minutes, then it goes back to 128.
in attachement is read by external programmer.
Thanks for any kind of help.

regards,
damdam


Hi friend

I can help you Monday