PDA

View Full Version : Swirl Flap Off Audi A3 B7 2.7 Tdi



kubuswujo
1st March, 2017, 12:38 PM
Hi!!
I do have Audi A4 B7 2.7 TDI Automat i have a problem with Swirl FLaps have them cleared and did't help. Still giving the fault code:

-------------------------------------------------------------------------------Address 01: Engine Labels: Redir Fail!
Part No SW: 8E2 910 401 E HW: 8E0 907 401 AL
Component: 2.7L V6TDI G000CG 0040
Revision: --H04--- Serial number: XXXXXXXXXXXXXX
Coding: 0011181
Shop #: WSC 80093 222 69422
VCID: 234589A9E2046B5AF4-8076


1 Fault Found:
012597 - Intake Manifold Runner Control
P3135 - 001 - Lower Stop not Reached
Freeze Frame:
Fault Status: 01100001
Fault Priority: 0
Fault Frequency: 22
Reset counter: 255
Mileage: 206213 km
Time Indication: 0


My SW is now 8E2 910 401 E, can someone edit it and make the Flap off? (I can Pay) I do have VCDS and VAS PC, ODIS, Abrites, Carprog and so on.
But did not have any Chiptunnig cable, will it be able to flash engine with edited file 8E2 910 401 E using ODIS-E if I uncheck "version check during flash" ?
Or I have to buy a Chiptunnig interface?

In a future i want to start doing Chiptunnig but know that is not that easy therefore i have to learn a lot, and more and more:D which interface should i buy then at the bigining? Mostly will make Vag cars.

NOX
1st March, 2017, 12:52 PM
send file friend!!!

kubuswujo
1st March, 2017, 02:54 PM
Hi!
here is the oryginal file: of 8E2910401 E 040
Can You edit this? How can I pay you? Wil You make this today?

432365

pawelelectro
1st March, 2017, 08:16 PM
Read ecu with any tuning interface.

alcorte
1st March, 2017, 08:46 PM
Hi!
here is the oryginal file: of 8E2910401 E 040
Can You edit this? How can I pay you? Wil You make this today?

432365

I can do free, but this file is wrong. You have to read with, ktag, kess, cmd, mpps, galletto, magpro, etc etc.

morgano
1st March, 2017, 09:01 PM
Here it is.

Regards,

kubuswujo
1st March, 2017, 10:50 PM
Thank's You very much, have bought a FTG Galleto and MPPS and wil have it on Friday.
Will read this ECU and than try morgano ECU. :)
Thank's!!!!! Will post if it work or not!