View Full Version : BMW S1000RR 2015
junmab
1st March, 2017, 04:41 PM
Hi,
I attached pictures that i took from motorcycle BMW S1000RR 2015.
I could not find a memory chip.
Any one can assist ?
432396
juancho18
1st March, 2017, 07:22 PM
photo dashboard.....
gepakg
1st March, 2017, 10:18 PM
of course they not have,it is BMSX ecu and must read int.ext.flash memory and somebody to fix very strong chskum km on it
also dashboard with dowq160 in it,very hard job,be care :-)
regards Gepa
Hi,
I attached pictures that i took from motorcycle BMW S1000RR 2015.
I could not find a memory chip.
Any one can assist ?
432396
junmab
2nd March, 2017, 12:43 PM
photo dashboard.....
432594
gepakg, the chip as you can see in the picture is ST160D0WT and not D0WQ.
It is not problem to manipulate this chip, and i have done that.
The dash is not a problem. The problem is the ECU.
gepakg
2nd March, 2017, 04:40 PM
no matter,in dashboard what write on eeprom,it is always st35160
for ECU as i said you must read int.flash & ext.flash...fix km and CRC,not easy job as i said in previous post,be care friend
must open ecu,find boot point,v54,mpps v18,ktag all read correct
regards Gepa
432594
gepakg, the chip as you can see in the picture is ST160D0WT and not D0WQ.
It is not problem to manipulate this chip, and i have done that.
The dash is not a problem. The problem is the ECU.
Raffy haddad
10th April, 2017, 08:14 PM
Dear gepa
Hi can fgtech clone read bmsx
Ecu ?
I am asking because i need a tool to read bmsx ecu incase need to synchronise with ews module
Thanks in advance
gepakg
10th April, 2017, 10:53 PM
answer is Yes!
regards Gepa
Dear gepa
Hi can fgtech clone read bmsx
Ecu ?
I am asking because i need a tool to read bmsx ecu incase need to synchronise with ews module
Thanks in advance
Raffy haddad
11th April, 2017, 06:58 AM
answer is Yes!
regards Gepa
dear gepa thanks for your answer i bought the fgtech new design and need to know how to conect it to this special ecu
can you please give how to conect it if possible
regards
chli1976
11th April, 2017, 03:04 PM
I have done in this way for a S1000R with ME17.2. In this way you do not need open the upper side from the cover. But i have only read this ecu
https://www.evc.de/de/product/bsl/showEcu.asp?title=ME17.2
Raffy haddad
12th April, 2017, 06:43 AM
Hi mate
Thanks for your reply
I tried to open the link but it only show the tricore mcu
I have the vd300 fgtech and i serched in driver and can't see bmsx ecu or even in bikes they are no bmw bikes
And if i need another hardware than fgtech please advise in clone one if you can
And i need it only to read the bmsx ecu
Regards
gepakg
12th April, 2017, 01:37 PM
here is :-)
regards Gepa
Hi mate
Thanks for your reply
I tried to open the link but it only show the tricore mcu
I have the vd300 fgtech and i serched in driver and can't see bmsx ecu or even in bikes they are no bmw bikes
And if i need another hardware than fgtech please advise in clone one if you can
And i need it only to read the bmsx ecu
Regards
Raffy haddad
13th April, 2017, 06:36 AM
Dear gepa
Thanks for your reply and for image
But which driver i should choose as bmw bikes or bmsx not available in the fgtech menu ?
Regards raffy
Motog
29th May, 2017, 02:47 PM
God Bless evc. Pain in the ass opening bottom side lol
Arthur151102
19th June, 2024, 07:09 PM
do you have news ?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.