PDA

View Full Version : Honda CBR500 eprom pinout


Fec001
2nd March, 2017, 09:23 AM
Hi!
Can someone give me pinout from the back of the panel to read eprom?

Thank you!
km666
2nd March, 2017, 10:10 AM
Hi,

Desolder LCD.i have problem after promraming via pinout.Many Honda and yamaha.

Regards,
frankrayk
2nd March, 2017, 06:42 PM
Hi!
Can someone give me pinout from the back of the panel to read eprom?

Thank you! here it is

432693
Fec001
3rd March, 2017, 09:19 AM
Many thanks!!!
zckariya70
3rd March, 2017, 09:22 AM
Many thanks!!!


yes mate he marked 93c66 ....................
frankrayk
3rd March, 2017, 03:02 PM
If someone needs to connect it to the bench.
432912432913
Rpmlimiter
30th October, 2020, 12:46 PM
Do I need to desolder lcd for this unit?


Verzonden vanaf mijn iPhone met Tapatalk
zckariya70
30th October, 2020, 01:22 PM
Do I need to desolder lcd for this unit?


Verzonden vanaf mijn iPhone met Tapatalk




No need to desolder the lcd see post #3 for the back soldering points...............
Rpmlimiter
30th October, 2020, 01:37 PM
Thank you. I’m asking because km666 had problems after programming with lcd installed.


Verzonden vanaf mijn iPhone met Tapatalk
zckariya70
30th October, 2020, 03:29 PM
Thank you. I’m asking because km666 had problems after programming with lcd installed.


Verzonden vanaf mijn iPhone met Tapatalk


I did many without any problem............reduce the voltage while read and write in ur programmer...............
Rpmlimiter
30th October, 2020, 03:30 PM
What voltage do you advice?


Verzonden vanaf mijn iPhone met Tapatalk