EDC17C46 Alhambra 2.0 tdi dont crank

[ribeiro44]

Hi there. I made an ecu replacement and immo off on an edc17c46, the original number of the ecu was 0281017093 and the new ecu is 0281017092 ( I think they are compatible) and software are the same just 03L0906018HL and the new onde just finishes in "HM" .And now the car dont even crank, i think this is very strange, it should at least cranck, right? I need some help i am going nuts whit this.
Thanks.

[morgano]

What tool did you use for read/write? How did you make immo off?

You have diag with ecu? Which errors show that prevent car to start?

[ribeiro44]

I used galletto v54 in boot mode. I asked a professional to make me immo off, in the dasboard doesnt apear anny error related with immo or any other. I will do diag today with VCDS to see. Thanks

[ribeiro44]

But this new ecu should work right?

[mihaiservice]

Hi
upload original file also file from ecu ! maybe new ecu are from car with adblue !

[ribeiro44]

Im not in home, i will post later. The original ecu had adblue, this new one i dont now. The van is from 2012 the new ecu is from a 2011 van. The original ecu is dead, cant upload original file :/

[ribeiro44]

Here is ori file.

[ribeiro44]

Hi, i used vcds today and besides the fuel injectores error e get this one P1612 "Engine Control Module Incorrectly Coded". Its possible to recoded it? But where do i get this code? ...

[mihaiservice]

Hi

try this file,if immo off are ok than engine should start !
chk updated in file !

[ribeiro44]

Thanks for the rapid response. I already have immo off in the ecu, before i try your file if i code de injectores should not all error go away, include p1612 ? Becouse i think i wiil always get this error. The new ecu has diferent injector calibrations.