Dash change VW

[zix1]

Hey

Someone ever changed a dash from lowline to highline? What about all the data (immo, vin, milage etc). What has to be done?

Got a Digiprog 3 and a r270

[rob h]

what model, year , partnumbers etc

[nexusjose]

You need a New MFD dash for it

https://uploads.tapatalk-cdn.com/20170305/2764ccc8e42a8dbe9e4524e42dc03204.jpg


Enviado desde mi iPhone utilizando Tapatalk

[zix1]

Vw touran
Old dash: 1T0 920 864
New dash with mfa+: 1T0 920 872

[H2Deetoo]

Using an OBD tool, read immo from old cluster and write to new cluster.
Also set mileage using same tool.

[rob h]

You need a tool like, vvd2 Avdi smelecom, with the correct Vag licence.
Or look for some D.K. member to help you out!

[zix1]

So I need to read out both eeprom via Digiprog.
Somebody knows which eeprom chip is inside?

[rola1971]

So I need to read out both eeprom via Digiprog.
Somebody knows which eeprom chip is inside?

you need not eeprom
you need full immo data

[nexusjose]

Key......kms....options........


Enviado desde mi iPhone utilizando Tapatalk

[zix1]

Ok. On which chip it's saved?
Only have a Digiprog 3 and r270.

[nexusjose]

I think you have micronas processor and 24c32 eeprom



Enviado desde mi iPhone utilizando Tapatalk

[zix1]

I can't read out via OBD because both clusters are dismounted. Other options?

[rob h]

Your pictures, they are not the ones corresponding with the partnumbers!
These are NEC24c32 24c64, not micronas!
So get a cdc programmer.
Look for micronas on D.K.

[zix1]

Sorry but it's very hard to understand what you say.
Can someone translate?

[alessioblaupunkt]

Those pics, are not the ones corresponding with the partnumbers!
Those are NEC, not micronas!
So get a cdc programmer.
Look for micronas on D.K.

rob h translated by alessioblaupunkt™ Best translator eva™

[rob h]

If your cluster is with a micronas processor. Then you can read and write the immo data using a programmer.

Audi VW micronas /Fujitsu programmer 2.0 >R200+R250
Some use xprog clone, and jtag smok can only read not write.

[zix1]

I never send those pics. They are from nexusjose.

Ok so the clue is, that I'm not able to read data with Digiprog or r270. Need to get an other tool.

[rob h]

Yep ,
I never send those pics. They are from nexusjose.

Ok so the clue is, that I'm not able to read data with Digiprog or r270. Need to get an other tool.

[nexusjose]

I never send those pics. They are from nexusjose.

Ok so the clue is, that I'm not able to read data with Digiprog or r270. Need to get an other tool.

Sorry for the confusion i'm thinkig about others dash from 2006 (audi)


Enviado desde mi iPhone utilizando Tapatalk

[zix1]

Too bad. Which tool would be helpfull in such situations? Should be useable in as many situations as possible.
Xprog or other an other tool?