View Full Version : Cas4 new adapter for upa
markony79
5th March, 2017, 08:31 AM
this adapter work like charm for all cas4 and anther mcu
https://youtu.be/kFcno8rADZ0
captain crackers
5th March, 2017, 09:32 AM
It just has the capacitor in the socket cover rather than soldering one on the end of the extra wire. I made mine as soon as the UUSP-S came out . Arthur
captain crackers
5th March, 2017, 09:50 AM
Here is a picture showing the socket with the cover removed. The capacitor with attached wire is soldered to pin 4, Ground pin 5, BKGD pin 6, Reset pin 7, 5 volt+ pin 9. Arthur.
markony79
5th March, 2017, 09:56 AM
sorry, its not the same .....my bypass sec bytes is in sec ...with out heating , and soon with out desoldering voltage regulator
soon is come out for xprog-m ...just now its in test
and soon for codiprog
next mounth all news for cas4
check photo , is it same like yours ?
very fast and 100% no probnlem with security bytes , in part of secund bypass
was work on this 5 mounths
in monday come out for codiprog
some days after for xprog-m
and if i have deal with smok ....also come out soon
javyb
5th March, 2017, 10:30 AM
this adapter work like charm for all cas4 and anther mcu
https://youtu.be/kFcno8rADZ0
Where did you order new adapter from
Sent from my SM-G935F using Tapatalk
captain crackers
5th March, 2017, 10:53 AM
Never had a problem with security bytes on UUSP-S. I have no interest in making them for other tools. All I know is it works 100% for what I want.
markony79
5th March, 2017, 11:17 AM
here, but must modifited adapter ....
https://shop.diagprog.com/product-eng-50-H1-3-Cable.html#zip_delivery_check_close
my is cost around 99eu
2xded
5th March, 2017, 12:38 PM
Here is a picture showing the socket with the cover removed. The capacitor with attached wire is soldered to pin 4, Ground pin 5, BKGD pin 6, Reset pin 7, 5 volt+ pin 9. Arthur.
Hi!
Can you to draw a diagram for unapprehensive?
Regards.
javyb
5th March, 2017, 12:49 PM
here, but must modifited adapter ....
https://shop.diagprog.com/product-eng-50-H1-3-Cable.html#zip_delivery_check_close
my is cost around 99eu
I have this cable could you pm the info how to modify please
Sent from my SM-G935F using Tapatalk
Tadas chipDPF
5th March, 2017, 01:45 PM
Can you give me link for uusp-s?
Thanks
Sent from my SM-G930F using Tapatalk
Johnner
5th March, 2017, 07:22 PM
here, but must modifited adapter ....
https://shop.diagprog.com/product-eng-50-H1-3-Cable.html#zip_delivery_check_close
my is cost around 99eu
Markony mate...you know the drill around here...there's no trading allowed
If you were doing this to help other people for free....then fine...but you're in this for your own gain
I'm closing this...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.