PDA

View Full Version : tuner board fault


psats
29th September, 2009, 10:11 PM
has any one opened there box as ive got tuner problem sat not finding channels
the board that connects both tuners has a track broken
i want to know if its supposed to be like that.

its the track with the wire and diode to it at both tuners
max_gee
30th September, 2009, 12:30 AM
Its meant to be like that. Have a look at the psu board to see if the 470uf 10v cap is gone
psats
30th September, 2009, 10:03 AM
the cap has been replaced . the cable tuners working fine
max_gee
30th September, 2009, 11:57 AM
when you do a sat scan, connect a multi meter to the lnb out out and see if its switching the 2 voltages for H & V
psats
30th September, 2009, 04:32 PM
ive loaded a working chnll list from dream the signal showing on that 89%
on the open its just shows 55%. 0 agc. 0 ber on all chnlls
cant do voltage test till see my m8 at weekend.
max_gee
30th September, 2009, 05:29 PM
ok let us know how u get on
psats
10th October, 2009, 08:37 PM
ok let us know how u get on

did the voltage check today get no volts from the tuner
looks like there no stronger than a clone dream version.
calisto
3rd November, 2009, 04:57 PM
My cousins box has got the same thing but both his tuners have gone, the sat & cable side, re flashed both the sat & cable with new images but still the same, waitingfortime on the cable side & t moving to 13e on the at side but the motorised dish does not move, any ideas?

Thanks
Calisto
psats
3rd November, 2009, 07:41 PM
My cousins box has got the same thing but both his tuners have gone, the sat & cable side, re flashed both the sat & cable with new images but still the same, waitingfortime on the cable side & t moving to 13e on the at side but the motorised dish does not move, any ideas?

Thanks
Calisto

check the capicitors on the power board and the the main board see if they have blown you get rounded tops if they blow.
calisto
4th November, 2009, 08:14 AM
check the capicitors on the power board and the the main board see if they have blown you get rounded tops if they blow.

Ok thanks, will check them out when get in from work.

Have you got a pic to know what I am looking for me please?

Thanks
psats
5th November, 2009, 01:38 PM
Ok thanks, will check them out when get in from work.

Have you got a pic to know what I am looking for me please?

Thanks

just check that the capacitors dont have a bulge on the top
you will notice a diffrence from the normal if blown.
gtturbo
23rd June, 2010, 11:54 AM
OKOKOKOKKOK
babayborn
29th June, 2010, 02:18 PM
Yeah, well done.:wink:
GamezSearch
11th August, 2010, 03:58 PM
Had the same problem replacing C15 on the power board fixed it wahoooooo :smokin: