PDA

View Full Version : Opel Zafira 2001y Y20DTH EDC15M(psg5) ecu



art64
7th March, 2017, 08:10 PM
Hello, is it possible to clone ecu for this car? Ecu is Bosch 0281010268 GM 24417169. Inside I did find this chips : eeprom 24c04, Infineon 1037355196 Siemens (B58748) and flash memory AM29F010B x2. Thank you if someone can give me necessary info

wronapl
8th March, 2017, 07:50 AM
Hi. If U had the same donor ecu number just replace eeprom and car start :)

dragon100
8th March, 2017, 07:58 AM
I agree ...

art64
8th March, 2017, 09:03 AM
Ecu not communicating with diagnostic. It seems damaged by wet,looking badly,but inside no wet (almost). I was trying to communicate on the bench without success. Ecu has strange alocation of pin numbers (because of missing one row pins) . On the bench I did connect 1,2 pins to the ground 3,39 pins to the plus 12V and K line to the 35 pin. No communication. If me will by second hand controller,how I can get the pin code from it? Will be to read 24c04 enough? From the immo coil I was doing it before

carbon7319
8th March, 2017, 10:36 AM
Yes 24c04 is enough for pin or just change 24c04 from old ecu to new.

art64
8th March, 2017, 04:49 PM
Solved. It was broken W wire between 35 pin of ecu and immo. I misunderstood why ecu wasn't connecting on the bench. I jumped K line wire directly to 35 pin (without immo box) Is it wrong?