CAS 2 Flash file required help e65 2004

[garagetech007]

Hi anyone on here can help me my cas is dead and so is car, if someone can check my eprom.i will post flash later.

Part numbers 61.32-6942488

Thanks in advance



https://uploads.tapatalk-cdn.com/20170312/110da5fe502037c9a14ac20bee718966.jpg

https://uploads.tapatalk-cdn.com/20170312/450027c1914b6460298994c38dd66238.jpg

https://uploads.tapatalk-cdn.com/20170312/6247911fe33c3c5e11492895a5443430.jpg

[pepi]

Try this flash read by rosfar.
No pass needed.

[garagetech007]

Try this flash read by rosfar.
No pass needed.

What u think about eprom?

[pepi]

Well , I can see 190860 km VIN also it seems to be ok .
Key 0 status USED UNKNOWN
Key 1 status USED PCF7924-44 Remote key
Key 2 status USED PCF7924-44 Remote key
Key 3 status USED UNKNOWN

What exactly did happen to your car , how did it come to this ?

[garagetech007]

Well , I can see 190860 km VIN also it seems to be ok .
Key 0 status USED UNKNOWN
Key 1 status USED PCF7924-44 Remote key
Key 2 status USED PCF7924-44 Remote key
Key 3 status USED UNKNOWN

What exactly did happen to your car , how did it come to this ?

well car got stolen and recovered so im just making a key i tried wiith avdi but was unsuccessfull so i took out cas and benched it with xprog. got this eprom and programmed key with tango into stot4 however when i installed in vehicle everything dead so i thought either it was damaged flash or eprom with xprog

i think eeprom is ok what you think?

[garagetech007]

here is flash attached ive read it with both xprog and ak500 in both cases when i compare with good flash provided there is some data missing . when i write both ak500 and xprog fails to write it accurately. ive read on forum best for these mask is rosfa red which i dont have i have orange or vvdi prog can do it ?

My question is why can't i erase this flash anyone know ?

[pepi]

Write this eep dump and let me know if it works.
Good luck.