jaguar xj 2010

[godfathertre]

i need to program or resyncronise a remote in this car keyless system jaguar xj 2010 the customer changed battery remote not working now can skp900 capable of doing this or do you need to delete other key also and reprogram

both i do not want to delete any keys if not safe thank you .

[gurmk]

Try as below:


1. OPEN Drivers door.
2. Operate Headlight lever in Flash High beam Position and HOLD.
3. Insert Key into Ignition and turn to AC position
4. Vehicle should make a Chime. L.E.D. should flash.
5. Operate Headlight lever to Flash High Beam position 5 times.
6. Vehicle should make a chime. L.E.D. should flash.
7. Now the vehicle is in program mode.
8. PRESS buttons on each remote control to be programmed, vehicle should CHIME and L.E.D should should flash for each Remote control programmed.
9. Switch ignition OFF and remove key.
10. Close drivers door.
11. Check operation of all remote controls.

[Fallen]

More than likely, the guy damaged the key while changing the battery.
I have seen this on many Jag's.
Swap data into another used key and it may work.

[godfathertre]

how do you swap data into another used key .

[p1et]

Desolder chip and solder into another key but I think you still not learned basic soldering skills(?) No offence, I'm actually helping you :)