Peugeot 207 crash data

[markgal251]

Hi, Can anybody help please , how do i clear the crash data on a Peugeot 207 Do i need to buy a carprog , or can i use a willam.

[dragon100]

First all details please from srs unit like this : Peugeot 207 2010 Bosch 0285010702 9666843980 95160 ...

[auto80]

Hi, Can anybody help please , how do i clear the crash data on a Peugeot 207 Do i need to buy a carprog , or can i use a willam.

hi m8, you need to read eeprom inside module and post dump here

Cheers

[markgal251]

Bosh , PSA. 96 635 934 80-80
I can't read it this is what i am saying i have a willam eprogger I have a dionostics reader Do i need to buy a carprog unit to read it and clear the crash data with the zip file on here posted corresponding to the unit.

[markgal251]

PS the car has been in a crash and only the drivers seat that's tucked in the side went off .

[dragon100]

Check if your Wiliam programmer program eeprom 95160, then desolder eeprom, read via Wiliam and post here, somebody clear it for you, then write file with Wiliam , clear errors and done ...

[markgal251]

OK i will check if the eeprom 95160 will fit in the w
Illam and let you guys know Thank very much for your help so far.

[markgal251]

OK guys i bought a carprog it also says find eeprom 95160 i cant find it on the board anywhere, The module is Bosch part no 0 285 010 112 and PSA is 96 635 934 80-00 I am lost now can anybody help me out please.

[dragon100]

Post here good quality photo from board srs unit ...

[markgal251]

Tried to upload photos they won't upload , and sorry after closer inspection i have found my eight leggeded friend.
But now my next obstacle, the adapter to the programmer has the usaul eight coloured wires , which one go,s where soldered on each leg

[dragon100]

If you have carprog, use clips where cable with red it for number 1 leg on soic 8 ...

[markgal251]

Thank so much for your help , but i dont know what you mean sorry.

[dragon100]

Red cable on first leg eeprom ...

[markgal251]

Thank you , found it in the box labelled A6 clip

[dragon100]

View from above ...

[markgal251]

This is the eeprom but it has extra numbers and read no string I'd ??? Error

[dragon100]

Desolder eeprom and read with clips from your carprog, clean all legs in the eeprom ...

[markgal251]

From the sketch of the eight legs you have post , if you look at the wires on the A6 clip the red one is on number 4 leg,and if you turn it round the red wire is then on number 8 that being the top left corner of your sketch. And it still says error reading chip I'd not found????

[dragon100]

Red one on nr 1 leg - left down corner in the view from above and check contact between eeprom legs and clips.

[markgal251]

Would it not be easier to use A4 adapter and solder wires on Looking at it your saying desolder it then place in clip that way the eeprom will be sat in the clip the other way up red wire would be on number 1 leg is that correct.

[dragon100]

Red on like in picture ....

[markgal251]

I see the point in the A4 adapter of soldering the wires in order onto the eeprom still in place on the board. But i do not see the point of the A6 adapter clip!!!!!! if your surpose to just place the clip on the eeprom all the wires are not in order on it .What is the point in it if you have to desolder the eeprom from the board then place it the right way up. Why didn't this A6 clip get made with the wires made in the right order so you just place it on top of the eeprom.

[markgal251]

OK i tried and i failed, does anybody please know the order and which coloured wire goes where on this eeprom. I did follow the order of adapter A6 as if i had desolder the eeprom and placed it in the clip.������

[markgal251]

Here is the dump from the eeprom Managed to do it with the clip on but read it through eeprom 95x and 95160 came up in the list in Carprog. 😁 Can you help with the clear data for this now please.

[dragon100]

Could you send all details srs unit like this : Peugeot 207 2010 Bosch 0285010702 9666843980 95160 , better to help you ...because I'm not sure that file is good read ...

[markgal251]

Thank you again , yes it's Peugeot 207 2007 year of manufacture.
SRS unit is
PSA 96 635 934 80 00
Part 0 285 010 112
Eeprom 95160 .
😁

[dragon100]

Try this file.

[markgal251]

No sorry didn't work , still saying on dash Airbag or preseatbelt tensioner fault also airbag symbol near the clock , Can i mention in this crash from previous owner only in the drivers seat little airbag went off .
I have tried all wires under the seats seem ok , plugged all seatbelts in and all go green except the passenger side. ???? ������

[dragon100]

Check errors via diagnostic equipment and write here ...

[markgal251]

Done that none at all .

[dragon100]

Success ???

[dell66]

Identical problem.
It joined dump ok for me

[markgal251]

No. dragon , i use my obd ll dionostics in the socket and there was no error codes .
But still on the dash i get airbag or seatbelt pretensioner fault ,and the airbag symbol is still there beneath the speedometer.

[cart10]

markgal251.... did u fix this ?