PDA

View Full Version : Siemmens ppd 1.2 dpf off



goyodesanctis
16th March, 2017, 01:19 PM
The car does not give error but tries to regenerate, the exhaust temperature less than 700 degrees
.Send original and modified file435981435982

morgano
16th March, 2017, 01:23 PM
Did you reset DPF settings with diagnose before flash the mod file? With original, set NEW DPF INSTALLED with diagnose and then flash the mod?

goyodesanctis
16th March, 2017, 01:25 PM
Yes, but carbon mass in meas blocks never goes down from 14 percent mass.DPF empty is installed from yesterday.
Is necessary to insert 21295 again with vcds to start regen???
With empty dpf is not possible to make adaptation values???
My strategy has been:
DTC's off and axis of post injection and regen injection set to 0, and 0 in all these duration maps.
Just duration main is untouched.
Regards

morgano
16th March, 2017, 01:27 PM
Have not looked at the files, so you developed your own solution... i assumed you used PPD solution.

goyodesanctis
16th March, 2017, 01:30 PM
DTC's off ok,and I had a file from A4 170hp, and any switches more changed, and I thought that it was a good idea to kill post and regen in this way.Car tries to regenerate, in a few kilometers white smoke at idle very few time but I think ECU is trying to force some mode.
Thank you for your reply

goyodesanctis
16th March, 2017, 01:36 PM
I have one dtc in vcds.
P0473 is the fault code, I'm seeing that G450 is not in good condition and I don't know if obd will let me make procedure exchanging dpf with this sensor in bad condition.

goyodesanctis
16th March, 2017, 01:37 PM
With post injection set to 0, egt is never 700 deg.
Always is down

goyodesanctis
16th March, 2017, 03:04 PM
Have not looked at the files, so you developed your own solution... i assumed you used PPD solution.

Any solution please???If someone needs anything ask me.
Regards