PDA

View Full Version : Audi Q7 need pin code


sasy90
21st March, 2017, 11:07 AM
Hi to all,
i've a audi q7 2007 year with all key lost.
I bought 2 new keys on dealer and now i want to adapt that .
I have a VAS and i try to put 36953 as pincode into "autorization to access" in EZS but VAS say me: " it has not possible to login"

Someone can help me to determinate correct pincode? In attachment i read 95320 of ecu diesel.

Someone can help me to tell me the procedure to adapt that new keys?

Thanks in advance

437158
eltiobarbas
21st March, 2017, 11:15 AM
To me its the right PIN
36953

Regards
sasy90
21st March, 2017, 11:19 AM
Ok pin is ok. How can i adapt new key with ODIS? I lost all key and now i have 2 new keys to adapt... whats procedure with ODIS?
rdu04
21st March, 2017, 11:27 AM
in my abritus clone pin is 36953
sasy90
21st March, 2017, 11:28 AM
procedure for adapt key with ODIS?
sasy90
21st March, 2017, 12:00 PM
someone can help me please??
Kaluluka
21st March, 2017, 01:24 PM
With ODIS only online with GEKO access...
sasy90
21st March, 2017, 04:38 PM
ok i found a person that give me GEKO account ... but so my situation is all key lost and when i try to mach new 2 keys , say me "turn ignition on"... How can i do that?
Kaluluka
21st March, 2017, 06:54 PM
New keys need to be prepared for vehicle you are adopting to.....

Wackeup is done with brake pedal depressed and high beam flashing (with lever on steering).
Tedum
21st March, 2017, 10:28 PM
ok i found a person that give me GEKO account ... but so my situation is all key lost and when i try to mach new 2 keys , say me "turn ignition on"... How can i do that?

Short the two fuses down from fuse 7 and fuse 11
sasy90
22nd March, 2017, 09:04 AM
i already shorted fuses but don't work... instrument not on....

With this short fuses , i can diag with odis... but instrument not work
gepakg
22nd March, 2017, 10:49 AM
you must have prepare keys with 12 byte CS before programming...

regards Gepa


i already shorted fuses but don't work... instrument not on....

With this short fuses , i can diag with odis... but instrument not work
Bllinda
22nd March, 2017, 02:34 PM
gepakg (http://www.digital-kaos.co.uk/forums/member.php/133471-gepakg)
you think of 12 bytes .... Thx
bobby maze
22nd March, 2017, 04:12 PM
Use force ignition on tool
And you need to precode dealer Key first using CS
And then learn Keys with that pin

Sent from my SM-G935W8 using Tapatalk
Kellerek
22nd March, 2017, 07:26 PM
Don't worry about the cluster not powering up ...immo is in kessy not cluster .when you prepare dealer key and add to kessy cluster will power up. Good luck