View Full Version : pinout bmw 418d 150hp ktag
alcorte
23rd March, 2017, 10:05 PM
I have one bmw 418d 150hp. I have ktag 2.22 with firmwar 7.020. But in type ecu, I don?t have this. Someone can upload pinout to connect to ecu.
Thank you.437919
mariusica_boy
23rd March, 2017, 10:45 PM
I have one bmw 418d 150hp. I have ktag 2.22 with firmwar 7.020. But in type ecu, I don?t have this. Someone can upload pinout to connect to ecu.
Thank you.437919
From Fgtech.
alcorte
23rd March, 2017, 11:30 PM
Ktag need ribbon cable 144300T105 In your picture is different to ktag.
Thank you.
alcorte
23rd March, 2017, 11:48 PM
duplicate.
gezame
24th March, 2017, 12:48 AM
Hi
Ecu is edc17cp50, GPT.
Send you mail, i dont can put the file help in f?rum.
Br
alcorte
24th March, 2017, 01:00 AM
I send my email.
teerak2uk
24th March, 2017, 07:49 AM
Hi
Ecu is edc17cp50, GPT.
Send you mail, i dont can put the file help in f?rum.
Br
It is in ktag software and shows you using boot cable and coloured ribbon cable also prob 3 variants of that ecu so compare with photos ktag gives to see where yellow & orange are located for ribbon cable
alcorte
24th March, 2017, 07:49 AM
437973The file does not have this ecu, Does not match any of the 3 versions. And I do not want to experiment with this ECU with gpt.
Plug-in 668: EDC17 C50 IROM TC1797 Hardware 1 , This hardware is similar, but the orange wire is not the same. Mine has 3 holes, and in the photo has two holes.
The file is 06/2016.
Someone....
smirnoff_rules
24th March, 2017, 08:06 AM
From Fgtech.
m8 do you have a pdf with all tricore pinouts ( grey boot wire)? if you have can l have a copy ? be useful for my mpps 18 , cheers
tricore3
24th March, 2017, 08:10 AM
you need gpt connection firmware 7.020 dont have active gpt plugin
teerak2uk
24th March, 2017, 08:14 AM
437973The file does not have this ecu, Does not match any of the 3 versions. And I do not want to experiment with this ECU with gpt.
Plug-in 668: EDC17 C50 IROM TC1797 Hardware 1 , This hardware is similar, but the orange wire is not the same. Mine has 3 holes, and in the photo has two holes.
The file is 06/2016.
Someone....
There is 3 versions of that ecu same as 3 series 2012>
alcorte
24th March, 2017, 08:33 AM
you need gpt connection firmware 7.020 dont have active gpt plugin
I appear to me as activated in the protocols.
437977
alcorte
24th March, 2017, 08:35 AM
There is 3 versions of that ecu same as 3 series 2012>
I do not want to take the opposite, but there are more than 3, you see the photo of the ecu than I upload. It is different from the 3 you mention.
gezame
25th March, 2017, 08:47 PM
m8 do you have a pdf with all tricore pinouts ( grey boot wire)? if you have can l have a copy ? be useful for my mpps 18 , cheers
Hi
See this, is for orignal fg.
Br.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.