PDA

View Full Version : Golf 1.8T 180hp Stage 2 mass air flow signal too low



armanman
2nd April, 2017, 07:54 AM
Hello,

Recently I used stage 2 file for golf 180hp , I put in the car everything is fine but then problem with the air mass flow sensor that signal is too low I put the air mas on stock car works fine, could anybody help me, Is the tuning ok or there is another problem, or something to consider.

the file from
masciaro , 06A906032KP 0203.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=354032&d=1453770508)

Thanks

icezero2010
2nd April, 2017, 11:53 AM
Hello,

Recently I used stage 2 file for golf 180hp , I put in the car everything is fine but then problem with the air mass flow sensor that signal is too low I put the air mas on stock car works fine, could anybody help me, Is the tuning ok or there is another problem, or something to consider.

the file from
masciaro ,

06A906032KP 0203.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=354032&d=1453770508)

Thanks

your file is extrem bad . air flow is up to 1200 that is the problem from your error

hfm corrcetion is not lambda it is a factor . and you have set down you run extrem lean on full load

boost and all other is sh.... .

only copy paste nothing other

2 words bad tuning

motronix85
2nd April, 2017, 05:36 PM
Get a good tune done mate,that one looks really bad

armanman
2nd April, 2017, 06:28 PM
Give me a good tuner name, please !