ECU MED9.5.10 death after flahing

[tiguan]

Hi All

I readed flash OBD and try to write mod file with fgtech but it stop on 26% and now is dead, removed and tryed on BDM file *(Tool - Ktag) what I read over obd but same ecu dead. Can anybody make a file from my obd read and bdm read after or have full bdm file ?Thank you

ECU label is this numbers:

VW Golf5 1.6 FSI
1037382189
0261S02117
03C906056AB
MED9.5.10

I writed flash again, problem in mpc or eprom please if anybody
Help or repair this file, BDM file


thank you

[morgano]

So you read obd, and tried to recover by bdm writting the obd file? Is that?

If so i hope you took snapshoot backup of briked ecu before you flashed obd file via bdm.

[tiguan]

So you read obd, and tried to recover by bdm writting the obd file? Is that?

If so i hope you took snapshoot backup of briked ecu before you flashed obd file via bdm.

First BDM is read as a backup, is original, nothing changed

[tiguan]

So you read obd, and tried to recover by bdm writting the obd file? Is that?

If so i hope you took snapshoot backup of briked ecu before you flashed obd file via bdm.

No read and write by OBD
at write 26% stopped. and only then is read out BDM