PDA

View Full Version : Ieco daily 3.0 edc17 after DPF remove errors on screen



darius89
4th April, 2017, 04:17 PM
Hi, does possible to delete error from dash. I removed dpf and have error on dash ( Particular filter clean incomplete )
I dont have tool to reset DPF service. I did only in ecu edc17 flash. In ecu I dont have errors.

icezero2010
5th April, 2017, 04:19 PM
wrong dpf solution .

luca22
6th April, 2017, 10:54 AM
Post Your file to check , mayby Icezero has a right and DPF off is no good solution.

In this ECU is Switch solution and works perfect (tested many times) :)

Regards
Luca

voltechcar
6th April, 2017, 06:41 PM
no wrong solution but you dont change dpf to new before write new file with dpf off. Write orginal, replace dpf to new ( i use kts ) write your file and done.

luca22
6th April, 2017, 07:40 PM
no wrong solution but you dont change dpf to new before write new file with dpf off. Write orginal, replace dpf to new ( i use kts ) write your file and done.

You may be right, I once had exactly such a case when a mechanic brought me an ECU, and did not reset DPF calculators.
I switched off the DPF by switches and the message was on the dashboard

But the first question is whether the dpf switch is correct

Regards
Luca :)