PDA

View Full Version : Avensis 2006 key maker problem


jacostanzo
4th April, 2017, 06:17 PM
Friends need help for a big problem.
Toyota Avensis came to me with all key lost, I found immobox and read it, valeo immobox with 24c02.
Original tango cant recognize dump version, tm100 the same. Zed full recognize file, but when try to write always give me a unknow error, VVDI recognize file and write id4d 67 but car no start, AVDI also recognize file and write an ID 4d 70 but also car no start. I don't have licence for AVDI for toyota so can't try by OBD, I have try by OBD with SKP 900 and Zed full without succes. Please anybody can check my file. Thanks, this car is drive me crazy!!!
lioncam
4th April, 2017, 07:09 PM
Post key data with 1srt page 33, 53 or 93

Envoy? de mon PHANTOM5 en utilisant Tapatalk
szengen
4th April, 2017, 11:12 PM
In my opinion wrongly read, X EEPROM
jacostanzo
5th April, 2017, 09:32 AM
Post key data with 1srt page 33, 53 or 93

Envoy? de mon PHANTOM5 en utilisant Tapatalk

Page 1: 33
Page 2: 00
Page 3: 2610b484

its enough friend?
lioncam
5th April, 2017, 11:48 AM
Page 1: 33
Page 2: 00
Page 3: 2610b484

its enough friend?

HI,
try this and let us know.
thks.
jacostanzo
5th April, 2017, 12:21 PM
Thanks mate. But no work. Strange immo light always blink slow, with or without transponder...
nazz2
5th April, 2017, 02:38 PM
Don't waste your time with people modifying your dump, specially if Vvti system, I have been there, done that, your only %100 solution is Tango, or virgin file
jacostanzo
5th April, 2017, 05:51 PM
Don't waste your time with people modifying your dump, specially if Vvti system, I have been there, done that, your only %100 solution is Tango, or virgin file

Friend Tango cant recognize my file, and my file is good, by diagnostics I can enter in immo and check that 2 master key programmed and 1 slave. Eprom is st24c04
EMCE159
8th April, 2017, 11:00 AM
Try this, should work. But I'm not sure if pg2 can be 00. Now file is recognized by tango.
jacostanzo
8th April, 2017, 11:38 AM
Try this, should work. But I'm not sure if pg2 can be 00. Now file is recognized by tango.

Thanks mate, but problem already solve, after many try and compare diferents dumps, write electronic head with ID70 Pg1: D3 Pg2:4F Pg3:E4F30C13 and car start, dump not recognize by Tango, I thing is a diferente version from Valeo immobox.