starview help needed

[hodgey]

it was all working fine until yesterday,, when i tried to re scan it to get ESPN

now i only seem to be able to get terrestrial channels and a couple of freeview channels

its driving me up the wall,, any advice or help appreciated lol

hodgey

[hodgey]

thanks that sounds very familiar to when i first got and installed the box,, i will try it after my lunch

cheers again
hodgey

[cactikid]

and write it down on a bit of paper for next time,as you will be doing it again.

[inch]

Hi, just completed factory reset, menu 1570 turn emu on.

Box just keeps on updating, could you confirm how long this process takes, its been updating now for nearly 20mins.

Thanks

[maca]

Hi, just completed factory reset, menu 1570 turn emu on.

Box just keeps on updating, could you confirm how long this process takes, its been updating now for nearly 20mins.

Thanks
switch box off from the back m8 and on again and let it update..maca..

[wilf]

it dont usually take that long. did you rescan after factory reset?

[inch]

Yes, these are the following steps i took:

1. Factory reset - 0000
2. menu 1570 - switch emu on, set default
3. installation - automatic scan - ntl.

is this correct procedure.

[wilf]

do as per joks instuctions a few posts up mate

[inch]

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!

[maca]

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!
ok m8 menu factory reset 0000 then 1570 press default key.
then auto scan
when finished exit out to main menu
then 1570
turn emu on
exit out to tv and let the box update..

[khenryashley]

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!

And make sure you press the default key

[inch]

Hi,

Thanks for the info, but still not working, still updating, could it be a problem with my system Info:

THE BOX
API ver: 4.51e_E
Boot ver: 7.0
9.Jul.2007

Thanks

[maca]

Hi,

Thanks for the info, but still not working, still updating, could it be a problem with my system Info:

THE BOX
API ver: 4.51e_E
Boot ver: 7.0
9.Jul.2007

Thankshttp://www.digital-kaos.co.uk/forums/f83/starview-2-box-v4-57-firmware-loader-18314/
this the latest fix m8

[inch]

Hi Thanks for the Info,

Is the problem with my box contnuing to update due to my system info being old?

Would it be possible for you to talk me through process of updating this & do i need any special leads.

Thanks once again for your help

[mtv1]

null modem cable all the info you need is here http://www.digital-kaos.co.uk/forums/f83/ good luck

[khenryashley]

Hi Thanks for the Info,

Is the problem with my box contnuing to update due to my system info being old?

Would it be possible for you to talk me through process of updating this & do i need any special leads.

Thanks once again for your help

If you haven?t got 4.57 you can download it from the sticky threads with the loader(4.03).
Download 4.57 + loader 4.03 to your desktop .
Open the file you downloaded to desktop. Extract the Bin file and loader to you r PC (remember where you saved the files)
Plug you Box into your Pc using RS232 female to female Null modem serial cable. (or USB to 9pin female cable- you will probably need the drivers for the usb. You can find these in the download section)
Locate the files you extracted and open the loader application 4.03. When box appears click on the Bin File button. Select the bin file 4.57 you saved to your PC. Press download and wait till it has reached 100%
Once you have flashed the new firmware go into the menu and do a factory reset.
Rescan the box choosing your local cable provider.(N*L etc) Choose english-autoscan
Once the channels have saved, exit out 3 times.
Press menu and then 1570 you will go into another secret menu.
Highlight the default key and press ok.
Then scroll down to the emu and turn it on.
Exit out and put your box onto a S*y sp1
Wait for it to update. This may take a while.
You should be now all up and running

[stuckylad]

if it still fails put the keys in manualy till you get it fixed m8