Mileage ECU Alfa Mito 1.4 Multiair 170 Marelli 8GMF

[anotherday15]

Hi Friends,


I need to change the mileage in the ECU on an Alfa Mito 1.4 Multiair 170 hp, ECU Marelli 8GMF.

With KTAG it is possible to extract the dump of MPC5565 and eeprom ST95640 (I think the mileage is stored here)

My problem is that: I can not connect my Ktag to the ECU, in the procedure it is indicated, i must connect the 3 red wires of the cable 14P600KT02 to the ECU, the problem is that I only have 2 wires red, do you have one Solution?


thanks

441187441188

[vageric]

why not create a split and you have then 3 red cables?

[anotherday15]

If I create a new wire from one of the 2 red wires I can not make a short circuit you think?

[vageric]

if all wires are 12v then i dont see the problem.
and no i dont think you can make short circuit.
i would say try it.

[anotherday15]

Thanks Friend, I tested with one wire in addition, works without problem.I post my dump, I think the mileage is stored in the eeprom ST95640.I need 82400 kms, someone can help me ?With my diagnostic OBD, ECU indicates 99203 kms and that there has already been 1 programming, it is possible to put 0 in number of programmings?Thanks

[anotherday15]

Person to help me to correct the odometer in this ECU?

thanks