VuDuo wont start following day

[unodat]

Hi

My VuDuo wont start with the remote after the following morning when I get up. I have to reboot from back of box again to start any issues why this might be?

I have EPG set to run at 4:00 in mornng using crossepg and save to HDD.

Never had this issues before. Done a reinstall flash a few times but problem comes back again.

[DOUGALMCD]

Epg is more memory intensive on older boxes now and can cause a few problems.
I'm assuming you are using vix image and it seems to be epg causing problem try creating a swap file from main menu>set up >vix section.
If not that then turn off automatic download and see what happens tomorrow.
May have to do a full reflash and re do new settings from start again.

[tristan2000]

Hello,

I have an ongoing problem with CrossEpg causing receiver to lock and crash. When this happens the only way to restart box is via the on/off switch. This was happening more often when I used to run Automatic search at 4:00 am like "unodat". Nowadays I run EPG manually but this problem still occurs. The other issue is that Telnet is not recognised during this occurance. The only time Telnet works is when the box is working OK and I am able to send any command eg opkg etc. and safely restarting box. In other words when I need to use Telnet it is not recognised. I have now deleted CrossEpg and only use EPGImport, When I was using the two epg’s could this be causing this problem?

[DOUGALMCD]

Telnet won't work as box will be frozen. As you said box working on epg import I assume it's set for Rytec UK xmltv on sources. So clear configuration settings on crossepg and don't use. I assume also you don't have epg saving to internal flash as this would create problems.

[tristan2000]

I confirm that I am using " Rytec XML TV" for the following: France/Germany etc/Italy/Poland/Spain and UK XML TV. CrossEpg Plugin has been removed (I looked in Dream Explorer and can't find any reference to CrossEpg) EPG is stored in media/hdd. Do you say that it is normal that Telnet will not work when box is frozen? I thought that one of the advantages of Telnet was that it will restart/reboot your box when things wrong wrong?

[tristan2000]

Hi,
I tried experiment last night. manually ran both EPGs last night, no problem. This AM run auto run EPG for EPGImport at 4.00 am and CrossEpg at 6.50 . This morning box was stuck and non responsive and clock at 6.50 approx (front panel is set for non scrolling)

[DOUGALMCD]

I confirm that I am using " Rytec XML TV" for the following: France/Germany etc/Italy/Poland/Spain and UK XML TV. CrossEpg Plugin has been removed (I looked in Dream Explorer and can't find any reference to CrossEpg) EPG is stored in media/hdd. Do you say that it is normal that Telnet will not work when box is frozen? I thought that one of the advantages of Telnet was that it will restart/reboot your box when things wrong wrong?


Why would you want to telnet when the rocker switch at rear of box can be flicked to restart it? No doubt when the box can't cope with operations because of inadequate ram and processor power it will freeze just as older computers do as well nowadays.

[tristan2000]

Why would you want to telnet when the rocker switch at rear of box can be flicked to restart it? No doubt when the box can't cope with operations because of inadequate ram and processor power it will freeze just as older computers do as well nowadays.

I thought it would become “bad practice” to continue (this makes me sound like I’m at work) to use the on/off rocker switch (actually I use the mains plug switch, because it is easier to get to). I now have given up on CrossEPG and only use EPGImport/Rytec. The box still locks up with CrossEPG. This morning around 10:00 am I setup Rytec and 11:00 am CrossEPG with no problems. Then in the afternoon set them up again and CrossEPG caused the box to lock. I've had enough of CrossEPG all together! BTW on another forum there appears to lots of messages about boxes locking during EPG

[cactikid]

i have 5 boxes all on openvix and use crossepg and have no issues at all but i save mine to external usb and never had issues,vu duo is an old slow box needing swapfile and cacheflush in use.
powering off and on the duo might end up with on and starting with red light of death.

[cunny]

@ op you need to turn off crossepg over night. If box is responsive next day then yes it's related to crossepg.

Most of the problems I've read here are more than likely bad memory units be it hdd or usb

[tristan2000]

Maybe I should have mentioned beforehand​ my box is a Miraclebox, and the epg is saved to 1tb hdd with 88% free disk space. Tonight I will only run Rytec at 4.00am and see how it goes.

[tristan2000]

Before I go I want to thank all for your suggestions.

[cunny]

If I was you, I'd totally disable epg. I think your hdd is at fault regardless of image/box manufacturer

Cunny

[tristan2000]

If I was you, I'd totally disable epg. I think your hdd is at fault regardless of image/box manufacturer

Cunny

Really, the hdd still records and playbacks, image backups still work no problem, maybe I should save epg to usb??

[cunny]

Have you tried a different imageand not reflashed the same 1

And epg.data set to hdd?

How about channel scanning? Is that set to over night?

[cactikid]

just rechecking usb is going to hdd and not internal flash? maybe opentv providers needs an update
cross epg-open tv provider--sly uk opentv

[tristan2000]

Have you tried a different imageand not reflashed the same 1

And epg.data set to hdd?

How about channel scanning? Is that set to over night?


I'll try an earlier image.
Yes epg is saved to /mediahdd
Channel scanning overnight? Does that mean Abm set to automatically run? If so no, I run Abm manually ever so often.

[cunny]

Or maybe a later image? I'm not familiar with your box.

I'd check abm and other pliggins if their set to run over night

Or if u can find crash logs?

[tristan2000]

Usb not plugged in, only hdd, rytec only, crossepg removed

[cunny]

See how that goes.

I'd definitely look into a new image. It could be a flaw thagsbeen addressed in a new release

[tristan2000]

Or maybe a later image? I'm not familiar with your box.

I'd check abm and other pliggins if their set to run over night

Or if u can find crash logs?


No plugins or anything set to run overnight, crashlogs are on computer, no crashlogs for two days'

[tristan2000]

See how that goes.

I'd definitely look into a new image. It could be a flaw thagsbeen addressed in a new release


Running latest image,

[cunny]

See how you get on but I'm not confident. Can u upload latest logs x 4

[tristan2000]

See how you get on but I'm not confident. Can u upload latest logs x 4

I'd be happy to do that when I am in front of the computer, and if you can point me the direction to upload them?��

[cunny]

Login via ftp usually on hdd

[tristan2000]

Login via ftp usually on hdd

Ok, I found the go advanced tag, I'll upload when I'm at the computer, I am at the tablet at the moment and it is too hard to do uploads etc on this tablet!!!

[tristan2000]

See how you get on but I'm not confident. Can u upload latest logs x 4

Hello again,

Tried to upload crash logs just now, unable to upload "file invalid" one of the files is called "Enigma2_crash_2017-05-02_22-33-06" it is a text file (I had no problems sending it to another forum, so I don’t understand that why I can’t send it to you)
Setup an auto EPGImport (Rytec only) for 4:00 am, box wouldn't start. I was thinking because I was running "ncam" maybe this is part of the problem?
FYI on the other forum another user has started a thread about crashes during epg download!

[cunny]

Any progress? I've been away working so sorry for.delay. Try a reflash

[tristan2000]

Any progress? I've been away working so sorry for.delay. Try a reflash

Oh back to happy days! Thanks for asking.
I did reflash made no difference; I still can't send logs to this website! However on another forum (it has world in title) I have no problems sending the same logs to them, and I was informed of a plugin called "removeepg" which works much better than using "load/save/delete epg". It hasn't solved the problem (so far) of box not waking up in the morning after running auto import of crossepg or epgimport, but we can live with that. So I don’t run autoimport anymore. What I do now is turn box on; run "removeepg"(the box switches itself off, run "crossepg" then “epgimport”. I tried uninstalling the skin “Slyk 1 HD Version 5” and went back to the default skin, that made no difference, so I’ve gone back to my favourite “Slyk 1 HD Version 5”.
My next issue is not being able to change the days downloaded by “epgimport” I have set it at “load 12 days” but only loads approx. 5 to 6 days! Crossepg runs for a full week.

[cactikid]

one of the handy things with epg going to usb as any issues that hit it can be fixed with a format and setup again.

[tristan2000]

one of the handy things with epg going to usb as any issues that hit it can be fixed with a format and setup again.
Are you sayimg it's better to save epg to usb over hdd?

[cunny]

No but it's worth a try as could sort your issues out. Like I suspected before it could be a memory unit fault causing all your woes

[tristan2000]

No but it's worth a try as could sort your issues out. Like I suspected before it could be a memory unit fault causing all your woes

Yeah, thanks for that. Actually I’m afraid I forgot you mentioned that before, sorry. FYI the box has had no problems since I installed and run the plugin “Remove EPG” most probably it had too many epg’s in the memory? I thought I’d cleared the memory! The box scans for epg at 07:00 BST