Dash M.Maretti VITO CDI write data

[designer79]

Hi, all
How to write data via K-line to (protocol)
Dash M.Maretti VITO CDI with 68hc908.
How to read and change km I know.
0x23 - cmd read data
84 69 F3 23 06 00 08 11 - read 8 bytes from addr 0600

[cammy25]

Best is to log K-line from DIgaconsult. that one works best with MaMa vito dashes

[episcop]

Licznik 4.0, 4.5, 4.8 change millage via K-line with simples k-line adapter.

[designer79]

I know how change km
I need write dump to 908 via k-line
cmd for write 0x3D

[episcop]

In this case.. only programmer.

[bodzio012]

Hi!!!
Licznik 9.02 change millage via K-line with interface max232

[tordu]

Hello, can you give me the pin for read by k line for the vito dash marelli
the dash didn't work at all i buy new mc68 but i need to save data, mileage, before replace it

thanks

have you try with kwp2000?

[designer79]

You need 908-serie programmer.
http://www.digital-kaos.co.uk/forums/f68/dash-m-maretti-vito-cdi-write-data-58865/#post298318
How to write dump to this KI ?
And i am interest how to read/write dump from Sprinter KI
with 93c66 2000 year via k-line.

[tordu]

There is carprog who gives a lot of info for reading writing by kl but i didn't find it...

for reading by kl what pins of the dash did you use ?

or did you have the pin out of the dash

thanks a lot !

[designer79]

Look at the licznik 3.2-4.8 picture
Who have carprog for scan protokol?
carprog site http://www.codecard.lt/carprog/cat_31.html