PDA

View Full Version : VW passat_EDC17



ssmax
10th April, 2017, 04:02 PM
Hello Friends, i make egr off to this car, but cant find fap maps, please could anything give me a good solution? or check file, this read by obd...
Thanks guys :)

Car is VW passat and ECU is Bosch EDC17

sonic 1989
10th April, 2017, 08:02 PM
please file original

ssmax
10th April, 2017, 08:13 PM
Thanks for reply friend, dont have ori file, car come to me this, i think that FAP was remove with Volta... because i compare

sonic 1989
10th April, 2017, 08:19 PM
look for ori file

ssmax
10th April, 2017, 08:25 PM
Friends, now cant write eeprom, i call client and this car went to VAG pass week... i think eeprom have anti tunning file, ECU is 0 281 015 029, Anyone have this problem before?

i can write flash, but cant write eeprom (operation not allowed said ktag)

Any help please

ssmax
10th April, 2017, 08:32 PM
Thats eeprom read, only can read and now ecu have not communication, because i write flash... anyone could unlock this eeprom? or check. i think have chksm error

icezero2010
10th April, 2017, 08:52 PM
Friends, now cant write eeprom, i call client and this car went to VAG pass week... i think eeprom have anti tunning file, ECU is 0 281 015 029, Anyone have this problem before?

i can write flash, but cant write eeprom (operation not allowed said ktag)

Any help please

fap was removed also dtc extrem bad tuning

ssmax
10th April, 2017, 09:34 PM
and anyone have this problem of cant write eeprom in edc17? i think is proyected and the problem is not syncro between eeprom and flash

ssmax
10th April, 2017, 11:03 PM
guys, anyone have this problem before? any way of syncro eeprom with flash?

icezero2010
10th April, 2017, 11:13 PM
guys, anyone have this problem before? any way of syncro eeprom with flash?

why u will write eeprom ???

eeprom is not protected

ssmax
10th April, 2017, 11:32 PM
i think, that lost syncro between flash and eeprom, cant write eeprom, i think this is new, this car went to VW factory, client dont tell me... and now when write flash lose comunication with ECU, and cant write eeprom, ktag said "operation not allowed" this is rare....

ssmax
11th April, 2017, 05:50 AM
Friend, i need complete BDM with immo off for this ecu, 0 281 015 029, i think that with full BDM i can write eeprom..

ssmax
11th April, 2017, 06:27 AM
I found this, ECU is locked because have TPROT, i cant recovery via obd tool, and VW service is far away... are any chance that someone here send me good file to recover? I must update online GEKO

smirnoff_rules
11th April, 2017, 06:54 AM
and anyone have this problem of cant write eeprom in edc17? i think is proyected and the problem is not syncro between eeprom and flash

what edc17 is it . last numbers cp20 ?

ssmax
11th April, 2017, 07:13 AM
0 281 015 029, edc17cp14-2.4

icezero2010
11th April, 2017, 09:14 AM
0 281 015 029 (tel:281 015 029), edc17cp14-2.4
The ecu has no tprot read in boot and post file

ssmax
11th April, 2017, 02:54 PM
Anyone have a full bdm with immo off for this ECU?

ssmax
11th April, 2017, 02:55 PM
Yes friend, is TPROT, because can read eeprom...

ssmax
11th April, 2017, 03:02 PM
I tried to write with galleto china clone, then ecu reject writing and car dont start.... i open and read with ktag and have chksm error, i write another soft and same, electro-fans on and car dont start.... when i tried to write eeprom ktag error "operation is not allowed"
yes friends is and edc17cp14-2.4, i do a remap and car was well, then client went to VW SERVICE and lose remap, client come again to me and when tried to write happen this.... i think is new problem? anyon this problem before?

Anyone have full bdm with immo off?

icezero2010
11th April, 2017, 03:12 PM
I tried to write with galleto china clone, then ecu reject writing and car dont start.... i open and read with ktag and have chksm error, i write another soft and same, electro-fans on and car dont start.... when i tried to write eeprom ktag error "operation is not allowed"
yes friends is and edc17cp14-2.4, i do a remap and car was well, then client went to VW SERVICE and lose remap, client come again to me and when tried to write happen this.... i think is new problem? anyon this problem before?

Anyone have full bdm with immo off?

the ecu has no tp !!!!!!!!!!

u can not read with ktag because you have obd write abort and the flash area is clear and the ecu is in programming mode ! you must read in boot make the flash area from adress 180000 to the end new . write in boot after that write obd the original back and all is good.

the ecu go from programming mode in normal mode .

why i know the ecu has no tp ! i have done many cars with that ecu

car is before 9/09

sw lower than 50000

ssmax
11th April, 2017, 03:24 PM
I tried to write with galleto china clone, then ecu reject writing and car dont start.... i open and read with ktag and have chksm error, i write another soft and same, electro-fans on and car dont start.... when i tried to write eeprom ktag error "operation is not allowed"
yes friends is and edc17cp14-2.4, i do a remap and car was well, then client went to VW SERVICE and lose remap, client come again to me and when tried to write happen this.... i think is new problem? anyon this problem before?

Anyone have full bdm with immo off?

icezero2010
11th April, 2017, 03:35 PM
I tried to write with galleto china clone, then ecu reject writing and car dont start.... i open and read with ktag and have chksm error, i write another soft and same, electro-fans on and car dont start.... when i tried to write eeprom ktag error "operation is not allowed"
yes friends is and edc17cp14-2.4, i do a remap and car was well, then client went to VW SERVICE and lose remap, client come again to me and when tried to write happen this.... i think is new problem? anyon this problem before?

Anyone have full bdm with immo off?

use galleto and read file in boot !! post it here !!!! u need the correct software number ;-) you need 56xxxx

u use a wrong file

ssmax
11th April, 2017, 03:52 PM
bad read... said me chksm error in boot mode

ssmax
11th April, 2017, 03:59 PM
I think with full boot mode read without immo can solve my problem, dont let me write any intflash in boot mode "operation not allowet"

icezero2010
11th April, 2017, 04:56 PM
I think with full boot mode read without immo can solve my problem, dont let me write any intflash in boot mode "operation not allowet"

cant use ktag file use galetto for read !!!!!!

ssmax
11th April, 2017, 05:05 PM
Thanks friend, i write intFlash, now i write back my eeprom, because have immo on, ecu have now communication...

kennfeld
11th April, 2017, 05:24 PM
you can restore with FRF file

ssmax
11th April, 2017, 05:37 PM
i dont have arbitres, only ktag, galleto, or vag k can, and also dont have FRF file,

ths ecu is stupid..

Write flash, ok
of course dont start, immo on,
write ori eeprom, also dont start..
cant write ori file via obd

what shift!!!

icezero2010
11th April, 2017, 05:59 PM
i dont have arbitres, only ktag, galleto, or vag k can, and also dont have FRF file,

ths ecu is stupid..

Write flash, ok
of course dont start, immo on,
write ori eeprom, also dont start..
cant write ori file via obd

what shift!!!

you cant write . u have the wrong software have u read before ? i hope for u

vw have done upgrade to 56xxxx and u write software 50xxxx this dont work

u can?t downgrade edc17 so easy

better go to a tuner !!!

u must flash 56xxxx

first tricore boot int flash second obd

ssmax
11th April, 2017, 06:03 PM
could anyone make immo off for this...Need immo off please

sonic 1989
11th April, 2017, 06:12 PM
write file in boot mode
your file ori bdm

ssmax
11th April, 2017, 06:53 PM
Sorry friend, this is 505921, this is the same, i need upgrade 56xxxx, anyone please

luca22
11th April, 2017, 06:55 PM
could anyone make immo off for this...Need immo off please

I can do immo off for You, but i think that not resolve Your problem...
Now You have a communication with ECU or fan started and car no start?

Regards

ssmax
11th April, 2017, 06:56 PM
I have comunication now, with two files that i post before, but this is not my ori files, ... and immo is on

ssmax
11th April, 2017, 07:08 PM
Sonic 1989 my friend, with your i have communication but car dont start, p0607

ssmax
11th April, 2017, 07:12 PM
Luca, my friend, could you do immo off for this, need to test.. i found this, same ecu, car start and stop.... while i ask to tune need to start car... anyone can make immo off for this?

icezero2010
11th April, 2017, 07:46 PM
Luca, my friend, could you do immo off for this, need to test.. i found this, same ecu, car start and stop.... while i ask to tune need to start car... anyone can make immo off for this?

you don?t do what i say you don?t read my posts u will do immo off with a complete wrong file this don?t work

write your ktag backup back before u write the old eeprom !!!!!

read eeprom !!post here we see what software u need !!!!

read intfl post it !!!!!

or buy a new ecu and give the car to dealer


;-) good luck

luca22
11th April, 2017, 08:28 PM
Luca, my friend, could you do immo off for this, need to test.. i found this, same ecu, car start and stop.... while i ask to tune need to start car... anyone can make immo off for this?

Here is Your file immo off
chs not calculated, galletto or ktag do that

I hope it solve Your problem


Regards
Luca

442391

ssmax
12th April, 2017, 07:04 AM
ICEzero my friend, yes, youre right, of course i read our post, but only need to solve my problem.... y post eeprom dump before...

ECU have commnication now, ECU is good, only need match ECU and eeprom, with last soft version

ssmax
12th April, 2017, 07:54 AM
all ori dumps,

luca22
12th April, 2017, 07:55 AM
ECU have commnication now, ECU is good, only need match ECU and eeprom, with last soft version

I understand that the car has start and rides well? The solution is immo off is tested and 100%

Regards :)

ssmax
12th April, 2017, 05:16 PM
Car start and stop and immo is on, dont work

ssmax
12th April, 2017, 06:08 PM
problem solved, went to vw service and upgrade, this is the best forum!!! thanks to all,

luca22
12th April, 2017, 09:11 PM
problem solved, went to vw service and upgrade, this is the best forum!!! thanks to all,

Hello Friend

It had to be a problem with the eeprom because this immo off solution was tested many times and it worked 100%. Auto start without problem but on dashboard is a message/
Anyway I am happy that You solve Your problem :)

Regards
Luca

ssmax
15th April, 2017, 10:21 AM
Anyone can HELP ME now to make FAP off, tested solution for this car?

thanks Lucas my friend, i give you all Thanks and Reputation, you are the best guys!!!!

Look, iam uploading VW last upgrade software for this ECU, cost me.. so i hope can solve problem if anyone have same of me.

luca22
15th April, 2017, 02:41 PM
Anyone can HELP ME now to make FAP off, tested solution for this car?

thanks Lucas my friend, i give you all Thanks and Reputation, you are the best guys!!!!

Look, iam uploading VW last upgrade software for this ECU, cost me.. so i hope can solve problem if anyone have same of me.

Here You are :)

K-TAG or Galletto calculate CHS in writing
443282

Regards :)
Luca

ssmax
15th April, 2017, 04:10 PM
Luca my friend, im doubt, i must write via obd or boot mode, i have both ktag and galleto..