Audi A3 milege problem

[r_parev]

Hi, after adaptation with AVDI org.(function"Magneti Marelli - Direct 2000+") , Odometer shows 0 and AVDI not want to recalibrated kilometers again. Please some help.
tacho is MM-8L0920930E
Audi A3 2002
thanks.

[mariazo84]

you eprom in the 9s12 it,s corrupted you need reprogram new software

[r_parev]

Got EEPROM for this?

[gogo660tc]

Restore the log

[vageric]

cant you make mileage with vcds?
cluster is at okm so must be possible with vcds.

[r_parev]

vageric ,how with VCDS?
Help Please.

[levisdj]

Login [Login - 11]



Enter a new value of 13861

[Do it!]
Make sure the cursor is still spinning and that you have not been booted out.
If this Login is rejected, then the cluster may not need a Login at all, so try continuing with the rest of this procedure.
Adaptation [Adaptation - 10]



Go into Channel 09

[Read]



Enter a new value of the number of km divided by 10.

Example: If old cluster had 50,357 km, put in 5036.
[Test]
Observe the Instrument Cluster and make sure the mileage displayed is correct.
Once you save this value, you will be unable to change the mileage EVER!
Unfortunately, some cluster will not display the test odometer on the cluster so just double check your work.
[Save]
The odometer should now display the correct reading in kilometers.


Copy/Paste from Ross-tech website... just google it,