DTC off and Tuned Delphi DCM 3.4

[koolstuff]

Hi DK members,
i want to ask if somebody could help me take off all the DTC on a Delphi DCM 3.4 for a Peugeot 307 and tune it a little so i can gain some more power and less fuel consumtion. Here is the flash i read using KESS V2
Thanks in advance.
DELPHI DCM 3.4
HW: 9663548180
SW: 9667025380

[Malinovskaja]

Contact my PM. I can help

[koolstuff]

Thanks but can you just send me the file here so i can test it? if it's a payable service i would understand it also!

[p38]

try this
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=401932&d=1475695980
PW

[koolstuff]

what is the password? i did not received in my inbox! Thanks

[koolstuff]

i have sent you a pm, check your inbox, and add me on skype please!

[Moldovan1]

On DCM3.4 is so easy to remove DTC. All DTC is in one table.

[koolstuff]

can you remove them and tune it a little?

[Moldovan1]

DTC can remove, it so easy on this ECU, but all DTC.... If the machine falls in to other hands? And about tune: i strongly not reccomend you to tune this ECU, because of the weaks injectors on this engine. But it is only my opinion. And good tune need more-more time, which is not present.

[koolstuff]

try this
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=401932&d=1475695980
PW
Bro you file works find but just for the first 150 km, i made a trip form my town to my home town and on my way back the engine check light popped up and said anti pollution system faulty, Can you please provide me a good file that is just like that one here, i was that you made many post about DCM3.4 and maybe you could have one that works with DPF & Egr Off.

[p38]

The file is good and checked on my car! Reset the FAP filter and add a diesel add-in to Diagbox or PP2000.
What are your DTC errors?

[mprog]

Do you remove additiv from bsi and ecu with planet or diagbox ?

Wysłane z mojego HUAWEI ATH-UL01 przy użyciu Tapatalka

[koolstuff]

Yes i turned them off with diagbox

[mprog]

send dtcs mate

[koolstuff]

ok i will upload it once at home,

[koolstuff]

Here are the DTC i got after flashing P38 file P1607 P2408 P0462 P1435 P1433

[koolstuff]

This is what i got after flashing the file from here http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=401932&d=1475695980, it worked at first but after some miles the engine check started and now it says antipollution system faulty!!

443121

[Moldovan1]

DTC P1607 P2408 P0462 P1435 P1433 off based on file EvoRemap

[p38]

Here are the DTC i got after flashing P38 file P1607 P2408 P0462 P1435 P1433

First, repair the car

[koolstuff]

DTC P1607 P2408 P0462 P1435 P1433 off based on file EvoRemap
Bro i flashed this one and everything were gone the DTCs and the warning light, bro you're awesome!! i haven't driven the car yet but i hope it wont popped up again!! Thanks a lot Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1)

[Moldovan1]

Bro i flashed this one and everything were gone the DTCs and the warning light, bro you're awesome!! i haven't driven the car yet but i hope it wont popped up again!! Thanks a lot Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1)

DTC strategy is different from DCM3.4 ECU installed on Renault. So I had to think a little, and Winols.exe and brain.exe help me. Is nice to hear that all is ok!

PS I can not respond in PM, because you PM box is full!

[koolstuff]

i drove the car like for 140km to go see my parents and there were a lot of smoke, i could see that from the rear glass view? is it normal?

[Moldovan1]

i drove the car like for 140km to go see my parents and there were a lot of smoke, i could see that from the rear glass view? is it normal?

With DPF anf EGR off - little bit of smoke exist, but no so much. If turbo is ok, in exaust pipe is not oil, means that AFR is not OK. Can you attach log from drive mode? But easily is to put ori file back and test!
Anyway I just made DTC off from existed file, any others maps I DONT TOUCH!

[p38]

With DPF anf EGR off - little bit of smoke exist, but no so much. If turbo is ok, in exaust pipe is not oil, means that AFR is not OK. Can you attach log from drive mode? But easily is to put ori file back and test!
Anyway I just made DTC off from existed file, any others maps I DONT TOUCH!
What to repair? :-) how can you remove the DTC and kill the car ... it will be quiet and you no longer need a DTC delete table.
Merry Easter


Colleagues

[Moldovan1]

What to repair? :-) how can you remove the DTC and kill the car ... it will be quiet and you no longer need a DTC delete table.
Merry Easter


Colleagues

All DTC that I removed from file is ABSOLUT have nothing with engine performance or health! On many ECU, also in DCM, when critical error occur, ECU go to use limp mode (when DTC is erased, whatever limp mode is on, only without MIL lamps on), what can NOT easily removed from flash (99% of people dont know where to look, many attempts, but without succes), and I do not touch this maps, it is outside DTC table range! Believe me. Anyway I made DTC off in file, that you a linked. At first, this file also must be checked.
Peace and MERRY EASTER to all!

[koolstuff]

Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1) I Wanted to thank you, the file that p38 (http://www.digital-kaos.co.uk/forums/member.php/443367-p38) uploaded is not DPF OFF i repeat your file is not DPF off, i drove it again yesterday and the Antipollution System warning came up! Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1) can you check if the file is already DPF off?
Thanks

[koolstuff]

Hi Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1) this is my original file with dpf & egr off, file works and engine is not so powerful compared to p38 (http://www.digital-kaos.co.uk/forums/member.php/443367-p38) file, so i was asking if you could erase the same DTC in this file and i will flash and let down the evoremap file from p38 (http://www.digital-kaos.co.uk/forums/member.php/443367-p38).
Thanks in advance.

password is the same as the evoremapped file

[Moldovan1]

Ok, I make this, but later. Same DTC remove from you ori file?

[koolstuff]

yes please, this works but has same dtc! please take them off

[Moldovan1]

This is DTC off file

[koolstuff]

Give me your skype Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1) i am still asking for it!!

[koolstuff]

I will test the file for the DTC, it has already the DPF and EGR off.

[koolstuff]

Moldovan1 (http://www.digital-kaos.co.uk/forums/member.php/462200-Moldovan1) the file has a password, i tried the same you gave me but it's not working.