2009 Holden VE Berlina

[LangasLS]

Hi Guys,
Just worked on a 2009 Holden VE Berlina.

Original file : 265km, Modified 165km.

Dash displays "Not Programmed ERROR", no mileage displayed.

Eeprom is a 24C04, dash made by Continental. I used tachosoft to modify the dump - same dash as a Chev Caprice. Its worked before without issue, but this time no go. Can someone please have a look at the attached files and see if you can notice something wrong? I believe the checksum may not have been calculated correctly / tachosoft have modified the wrong bits.

Thanks!

[clusters]

Try changing 00d4-00d5 to 00 00. Recheck your soldering etc.

[LangasLS]

Thanks mate. I've come to the conclusion someone else has had a crack at this cluster. I never saw it working in the first place, I can put the original dump back on it and it still behaves the same. I've tried a couple of other dumps from the same year car with the same results...Can read the VIN back out of the cluster with a scan tool, so can confirm it is reading the eeprom correctly - but something else is stuffed software wise. It never ends!