kur715
14th April, 2017, 01:06 PM
Hi guys ,
I am having some difficulty adjusting the ODO on my vehicle
2006 Toyota Hilux (KUN26R)
93C56 eprom
443051
I purchased a USB programmer off ebay (EZP) , desoldered the chip
used the programmer but everytime I put new KM code then
write to chip it works but when I plug back into dash the ODO
just flashes and the KM's are in correct to what the software (tachsoft 23.1)
says they should be Eg 55 07 = 200,000km but will actually be
970,000km on the ODO when plugged into the vehicle and the ODO just flashes now
Original mileage = 297,368km
I wish to change to 200,000km
443052
Any help will be much appreciated
I am having some difficulty adjusting the ODO on my vehicle
2006 Toyota Hilux (KUN26R)
93C56 eprom
443051
I purchased a USB programmer off ebay (EZP) , desoldered the chip
used the programmer but everytime I put new KM code then
write to chip it works but when I plug back into dash the ODO
just flashes and the KM's are in correct to what the software (tachsoft 23.1)
says they should be Eg 55 07 = 200,000km but will actually be
970,000km on the ODO when plugged into the vehicle and the ODO just flashes now
Original mileage = 297,368km
I wish to change to 200,000km
443052
Any help will be much appreciated