Bosch ME 7.4.4

[Billy99]

Hi newbie here,

I have a Bosch ME 7.4.4/0 261 207 477 from Peugeot 206 which has immobiliser problem, is it true I can read/write flash and eprom using diagnostic port only? with a Galletto? I read this is possible with ME 7xx only, just wanting someone to confirm this before I order a Galletto?

Many thanks

[kennfeld]

not with galletto clone maybee the official will the eeprom read write don't exist since very longtime on that ecu's

[Billy99]

not with galletto clone maybee the official will the eeprom read write don't exist since very longtime on that ecu's

Thanks for advice, it was just when I read clone description it said "Now update to 1260 version .This version can achieve to read and write flash/eprom dumps of the most recent ECUs. "

So I thought maybe it would work, can you recommend any programmer which is not a lot of money and will read 95160 and 29f400? I found that the TL866CS(Willem clone?) can read the 95 series and 29 series chips, will this be OK?



​Thanks again.

[Billy99]

I also look into KTag Clone, would this be better solution? As from what I understand there is no need to desolder the chips it can read by ecu pins? and can also read both the 29f400 and 95160?

Thanks in advance to all who help