PDA

View Full Version : Honda 2002 ST1300 eeprom location



Fallen
17th April, 2017, 07:49 AM
Hi guys,

Does anybody know the eeprom location on this Honda ECU?
I did find an LR56 but there was no key data in there.

Cheers

Cromwe11
17th April, 2017, 01:50 PM
No direct access to the eprom on this ecu its buried under the heat sink. So you need to read it from the back.

443553

LKEY
7th September, 2017, 03:29 PM
Hi Cromwe11,

Thanks for the info May I ask does this apply to the 2006 ST1300 with the 38770-MCS-G02 ECU as well? If so please may I ask for a photo graph further away to get location properly.

Please AND Thank You in advance.

LKEY
7th September, 2017, 03:41 PM
Hi Cromwe11,

Please could you post a pic of complete box further away for locating purposes?

Please and Thank You
(Only been cleaning this ECU for about 2 hrs Ha ha)

Cromwe11
7th September, 2017, 10:32 PM
Yes this is 38770-MCS-G02

LKEY
8th September, 2017, 07:16 AM
Thank You very much Cromwe11 appreciate it have a great day further.

CaioW
5th October, 2017, 09:48 AM
Thank you friend! Work perfect!

LKEY
5th October, 2017, 10:15 AM
477079

A rough But practical template for reference for next person to use for this ECU. And once Again Thanks to All for All Our Input.

LKEY
5th October, 2017, 10:21 AM
Hi All

BIG thanks To ALL for All the INPUTS.

motobrothers
8th December, 2017, 11:53 AM
Hi. I have MCU honda st 1300 2007y. 38600-MCS-G01. Where is eprom.

Cromwe11
8th December, 2017, 04:05 PM
Hi. I have MCU honda st 1300 2007y. 38600-MCS-G01. Where is eprom.

If you are looking to make new keys then you need the engine ecu part number starts 38770. That’s the ABS ecu you have pictured.

Cromwe11
8th December, 2017, 04:53 PM
491456 No12 in the image just behind the abs ecu that you have. You ECU will be 38770-MCS-G02.

AvechuchoAxel
26th April, 2018, 01:52 AM
TACHOSOFT will show you PART of the info...

lines 080 - 090 enter the info in KM
lines 0C0 - 0D0 enter same info in miles.

in my case I had to do both in order to have it working...

its a 93c56 eeprom

Good luck

BAL LOCKS
31st December, 2019, 09:53 AM
Hi would this be the same location for the 8770-MCS-U71 Kelhn EP on a 2007 ST1300 also ?

aok1168
12th February, 2020, 05:46 PM
大家好
請問,缺少C259零件,我該怎麼用呢?
謝謝你們

papisky
24th February, 2023, 12:44 AM
Hi y’all could you please send me dump file of 93c46

thanks in advance

papisky
25th February, 2023, 04:15 AM
Hello could you please send me dump file of 93c46 please

papisky
25th February, 2023, 04:17 AM
Hello can you send me the dump file i really need it

thanks in advance

swq123
6th March, 2023, 04:04 PM
Cromwe11 Thank!
38770-mcs-f01 works to

houdini security
8th May, 2024, 08:15 AM
Hello sir. Hope you are well? I have the same ecu as mentioned in the discussion. My question is with what device does one read it after cutting open the back?